0
It is the speed you electrical drive device will run when it is just running but has not load.
This would apply to:
a furnace fan motor (or any motor) not connected to the fan
a pump that is running but is not pumping anything
a blender with no mixing container on top
And so on
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How will the speed and the slip of the motor change with increasing load in star wye and delta connection?
the speed decrease if increasing load..in star connection the speed lower
What happens if load is greater than output power?
For AC system speed of generator will be decreased and then frequency decrease, if there is no trip the motor load will be automaticaly reduced as Load Power = torque x speed and speed of motor vary acc to frequency. Finally the motor will be run at new lower speed that load = power generation. The other effect is voltage in the system will be decreased and result of lower load consumption
What is full load speed?
The "full load speed" is the speed at which a motor has been designed to turn - usually measured in RPM (revolutions per minute) - when it is delivering its full rated output power.
What is the reasons for the slight decrease in the speed of the motor from no-load to full load?
Without going into the math, the change in speed increases the torque the motor can supply. The further the motor speed and supply speed are apart (known as the slip), the greater the torque will be.
Why induction motor current increase when load increase?
The slip is proportional to the load torque in an induction motor. This can also be seen as a reduction in speed causing extra current to be induced in the rotor to supply the increased torque.
What does the tires speed index mean?
It indicates the maximum speed at which the tire can carry a load corresponding to it's load index.
What is the speed of DC series motor at no load?
No load speed is the speed that the motor run when it has no load, i.e., the motor is separated from the engine, that speed is than greater than the rated speed, because the rated speed is the speed whwn the motor are linked to the load and it is the full load.
What does 99h on tires mean?
The 99 is the load rating and the H is the speed rating. The higher the load number the more weight the tire can carry. The speed number H means it is rated to 130 mph.
What does 99H mean on your tire?
The 99 is the load rating and the H is the speed rating. The higher the load number the more weight the tire can carry. The speed number H means it is rated to 130 mph.
On the computer platform Linux, what does load balancing mean?
Load balancing uses multiple hardware devices to make tasks more efficient. Also, using load balancing increases system speed
What does 91T mean on a tire?
Load index 91 is a number that equates to a load index which is what weight the tyre can carry. It is important to choose the same load rating or go higher. The 'T' is the speed rating so if you tyres are a 'T' speed rated that means the tyre has been tested up to speeds of 118mph and is safe up to that speed.
What does 104T mean on tires?
104 T is the 'Load Index' and 'Speed Rating' on modern tires. The load # 104 means each tire can support 900 Kg and the speed rating 'T' means they are good to use up to 118 mph.
Why speed of the induction motor falls when load is increased?
As the load increases, the speed reduces to deliver the increased torque required.
How will the speed and the slip of the motor change with increasing load in star wye and delta connection?
the speed decrease if increasing load..in star connection the speed lower
What does tire size 94V mean?
That number refers to the maximum load rating(94) and the maximum speed rating (V)
What does no load speed on a electric motor mean?
Generally a motor drives some equipment, it could be a fan, or a pump, connected to motor's shaft. The speed of the motor when no equipment is connected to its shaft is known as no load speed.
How speed of the repulsion motor can be reversed?
it has very high speed but no load
