You have a sensor or something wrong in your engine peformance. You need to use a scan tool to scan your PCM or you can use a paper clip to retrieve trouble codes for your car. You have ALDL on 1994 saturns. Assembly line Diagnostic link. Under your dash about where your left knee is when your driving is your ALDL. just take a paper clip and jump the B lead with the A lead. then turn your key to the on position.(don't start just turn key on)your service engine soon light should start to blink the trouble codes stored on your PCM. invest in a manual for your car it will explain how to read and understand the codes. The codes will help pinpoint the problem you are having. The internet has alot of information on this topic too.
yes ,gud chance it is blocked
With that 1994 year you have a OBD I system. You can clear the memory by disconnecting the neg cable from the battery for a moment then reconnect it. If the car has a problem it will relight the check engine light again.
Check for a loose connection Check for a loose fuse in the fuse box Check for an open wire in the brake light circuit
check under hood in the fuse panel on the right. itll say ignition switch. see if there is a fuse in that slot if not take the fuse from the abs slot and chreck if the engine will turn over.
it may have a used engine from a 95 truck put in it. Or, it could be a late 1994, and Toyota was installing 1995 starters on the last of the production run for that year.
For the 1994, you have to remove the negative battery cable, then depress the brake and hold it in for 5 seconds to reset the check engine light.
Use a code reader to find out why the check engine light is on.
If the check engine light is on, use a code scanner to find out why.
what are some of the problems of a check engine light for 1994 E class mercedes?
huh?
Your mom.
Check the engine oil, sometimes when the oil is low the check engine light comes on while sitting still and goes out when you accelarate.
dash dash
Get a code read out from your engine computer and it will tell you what is wrong.
The check engine light comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, a check engine light is lit when there is a problem in the emissions or somthing that is affecting the effectiveness of the emissions.
Check engine light? You have to plug the computer in to read the faults. If you do not have one, then most good service shops have, and for a small fee will help you.
Disconnect the battery for about 10-15 minutes resets the computer, and that means no Check Engine Light after you have fixed/ replaced what was wrong.