0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you locate the low pressure point on the ac unit?
The low side has a bigger fitting then the hide side
Where is the low pressure air conditioner charge fitting located for a 1992 Jeep Comanche Is it the upper or lower fitting behind compressor?
The low pressure side of most cars is the larger of the 2 lines. This should hold true for the Comanche as well.
Which fitting to use to charge air 2000 dakota?
The low side (smaller fitting).
Is there a picture of low side service fitting?
if you are referring to the a/c lines just trace the biggest line from the back of your compressor to the fitting and that's your low side port.
Where is the low side of ac air compressor 1997 Saturn?
low side of a/c is the larger diameter line it the smaller fitting(charge side) vs. high side is your smaller line larger fitting
Where is the low side fitting for the air conditoner on a Chrysler 300?
The low side will be located on the front side of the a/c manifold..........
Were do you add freon on a 2003 ford expedition xlt?
LOCATE THE SERVICE FITTINGS Next, you need to locate the service fittings on the A/C system. There are two: a LOW side fitting and a HIGH side fitting. The LOW side fitting is usually located on the suction hose or line that goes from the accumulator to the compressor. The HIGH side fitting is located on the line that goes from the compressor to the condenser. R12 Low Side 7/16 in. threaded ß----------à R134 Low Side 13mm Quick-disconnect R12 High Side 3/8 in. threaded ß----------à R134A High Side 16mm Quick-disconnect On older R12 systems, the LOW and HIGH pressure service fittings are screw-type Schrader valves. On newer R134a systems, the LOW and HIGH side service fittings are quick-connect style fittings. The LOW pressure fitting is SMALLER than the HIGH pressure fitting.
Where is the low side port to recharge the air conditioner on a 1998 Chevrolet Camaro?
The low side fitting is on the accumulator. Knowing how to service the unit is more important. Today's air conditioners require EXACT measurements or you will have problems. That is best left to a certified technician.
Where is low side port for refrigerant on 1995 dodge ram 1500 8cly?
LOCATE THE SERVICE FITTINGS Next, you need to locate the service fittings on the A/C system. There are two: a LOW side fitting and a HIGH side fitting. The LOW side fitting is usually located on the suction hose or line that goes from the accumulator to the compressor. The HIGH side fitting is located on the line that goes from the compressor to the condenser. R12 Low Side 7/16 in. threaded ß----------à R134 Low Side 13mm Quick-disconnect R12 High Side 3/8 in. threaded ß----------à R134A High Side 16mm Quick-disconnect On older R12 systems, the LOW and HIGH pressure service fittings are screw-type Schrader valves. On newer R134a systems, the LOW and HIGH side service fittings are quick-connect style fittings. The LOW pressure fitting is SMALLER than the HIGH pressure fitting.
Where is the low side of AC on a 97 dodge caravan?
If you are wondering where to add R134a on the low side, the fitting is located on the passenger side of the car, near the compressor and towards the headlight from the drive belt (fairly close, about a foot away, to the radiator). There should be a black cap (screw) just like a valve stem cover on a tire covering the valve. The high side connector is located in the engine compartment, passenger side, near the fender well back towards the alternator and very close to the drive belt. The high side fitting is much harder to find (see) than the low side- the low side is right out in the open. The fitting you have for adding R134a from the can will not fit on the high side. The high side fitting is larger than the low side fitting.
Where is the low side fitting on a 2002 impala?
The A/C low side service port is by the Firewall, just below the Passenger's Side Windshield Wiper Arm.....
Does adding freon go to high or low pressure side?
Always to the low pressure side. The low pressure side fitting is normally near the dryer ( large silver canister).
