the voltage pushes
The AC current grows gradually when an inductive circuit is switched on. This specific current, also know as a electromagnetic field, is slowly growing, then shrinking, and changing, because of the wire current.
Fly wheeling or ringing is a process where by circulating current will cause a ringing effect where that is useful is on SCR circuit to reverse power for a shot time enough to reduce holding current therefore shutting the device off
Answer: it will burn out **Explain:**The same current flows through each part of a series circuit. If the circuit is broken at any point there won't be any current that will flow. In this case, if one of the bulbs blew out, the other bulb would not be able to light up because the flow of electric current would have been interrupted. #Carryonlearning
A diode will only conduct electricity if the polarity of the current is in the correct direction, because diodes can only conduct in one direction.
What is meant by resonance and explain the series and parallel resonance? by kathiresan
if this is to do with electricity then this may help. Basically, you have to explain how the circuit works. So you may want to explain the function of the battery and how it produces electricla energy. Then you say how the current travels through the wire. Just explain what voltage is as well. It is quite easy as that.
You can explain the basic relationships:* An electrical current will be accompanied by a magnetic field. That is, it will act as a magnet. * If a conductor moves through a magnetic field (e.g., near a magnet), a current will flow through the conductor (if there is a closed circuit).
explain the need for circuit protection
Current in a series circuit travels in one path. This is because a series circuit is only one path. current in a series circuit stays the same thoughout the circuit this means that if in the beginning of the circuit there are 2 amps of current there will be the same ammount of current in the middle and in the end of it. if you don't understand this please tell me and ill explain in a better way.
Excessive current can be in the connection of many devices into a single socket.this may cause overload in the circuit
The AC current grows gradually when an inductive circuit is switched on. This specific current, also know as a electromagnetic field, is slowly growing, then shrinking, and changing, because of the wire current.
No. As the "Related links" explain below, it is normal when you are using copious amounts of electricity.
Kirchoff's Current Law: The signed sum of the currents entering a node is equal to zero. This means that the current leaving the battery is equal to the sum of the currents in the branches of the circuit.
You have to excite it with a sinusoidal signal then measure the current or voltage
Removing any bulb breaks the continuity of a series circuit, stopping the flow of electrical current. Removing a bulb in a parallel circuit does not interrupt the current flow, so the remaining lights continue to conduct electrical current.
Definition of isolate:1. To set apart (a component, circuit, or system) from a source of electricity.2. To insulate or shield.
Ohms' law says if voltage stays constant resistance controls the current flow. Resistance goes up, current goes down. E/I*R.