Cam dwell is: The number The number of degrees a cam rotates during the time the object controlled the cam does not move. The breaker points in the ignition system of a reciprocating engine are opened by a cam. The cam dwell, or cam dwell angle, is the number of degrees the cam rotates between the time the breaker points close and the time they open.of degrees a cam rotates during the time the object controlled by the cam does not move. The breaker points in the ignition system of a reciprocating engine are opened by a cam. The cam dwell, or cam dwell angle, is the number of degrees the cam rotates between the time the breaker points close and the time they open. Copied from: http://www.datwiki.net/page.php?id=1418&find=cam%20dwell&searching=yes
Dwell is reduced.
28 degrees point dwell / .017 point gap according to my Chilton book
Point gap is 19 The dwell is 28 to 32
On a 1968 Ford Mustang 302 cubic inch V8 : point dwell ( 24 to 29 ) - with manual transmission point dwell ( 26 to 31 ) - with automatic transmission
.020 If you have a dwell meter it is 30 degrees of dwell.
Use a dwell meter to set the points at 30 degrees dwell.
I believe that is 35 to 38 point dwell for a 1966 Ford Mustang 200 straight 6 cylinder
Yes, but the dwell meter is by far the best and easiest way on a Chevy.
The point dwell is 26 - 30 The point gap is .017 According to motorcraft.com ( one of Fords websites )
what is point setting for chev 350 v8 engine Use dwell meter to set the gap to 30 degrees dwell.
the dwell is 35 to 40 degrees ---------------------------------------------------------------- ( on a 1968 F series W / EC - point gap .027 / point dwell 35 - 40 ) and ( on a 1968 F series WO / EC - point gap .025 / point dwell 37 - 42 ) for 240 C I straight 6
Use a dwell meter to adjust the points to 30 degrees dwell.