0
TPS Class CT is used for transient performance (TP). TPS class Current Transformer has Low Leakage Flux and there is no limit for remanent flux) further there are also TPX,TPY and TPZ class CTs
1. TPX- No Limit for remanent flux due to nil air gap in the core
2. TPY - remanent flux does not exceeded 10 % due to less air gap in the core
3. TPZ- Having practically null remanent flux because there is large air gap is provide in the Core
Er. Anil Prajapati, Protection Engineer,Jaipur RVPNL
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the difference between Class TPS and Type X Current Transformers?
I am aware that Class TPS current transformers have a Low Leakage Flux design
Why leakage reactance is kept small?
Leakage reactance is useful for limiting the short circuit current in transformer and generators. therefore normally the reactance of transformer varies for 4.5% for distribution transformer to 12.5% for 400KV class.
What is cl PS current transformer?
CL of a CT is its accuracy class.. it is an approximate measure of the CT's accuracy. e.g. The ratio (primary to secondary current) error of a Class 1 (CL:1.0) CT is 1% at rated current
Eddy current in transformer?
Yes, a transformer has eddy currents.
What is the function of the primary current when the secondary winding of the transformer is open?
When the secondary of a transformer is opened, there is no longer any load on the transformer. There will be some current flowing in the primary winding, which is needed to induce the voltage in the secondary. This primary current is referred to as the "no load" current, and is indicative of the core losses in the transformer.
What is the difference between Class TPS and Type X Current Transformers?
I am aware that Class TPS current transformers have a Low Leakage Flux design
What is accuracy class in current transformer?
don't worry
How do you determine vkp and rct for class x current transformer given example of 8005a 15va class x ct?
RCT is Secondary resistance of Current transformer it depends on Design.
Why leakage reactance is kept small?
Leakage reactance is useful for limiting the short circuit current in transformer and generators. therefore normally the reactance of transformer varies for 4.5% for distribution transformer to 12.5% for 400KV class.
Why current transformer rated as 0.5 5p 10p 20p?
These are the Class codes for CTs used for protection purposes.
What is cl PS current transformer?
CL of a CT is its accuracy class.. it is an approximate measure of the CT's accuracy. e.g. The ratio (primary to secondary current) error of a Class 1 (CL:1.0) CT is 1% at rated current
What does CL of a current transformer signifies?
CL of a CT is its accuracy class.. it is an approximate measure of the CT's accuracy. e.g. The ratio (primary to secondary current) error of a Class 1 (CL:1.0) CT is 1% at rated current
How is current controlled in welding transformer?
in welding machine, the transformer used is basically a current transforrmer. so by changing the tap of secondary side of transformer, we can increase or decrease the current in the transformer.
What is principle of Current transformer?
why does have to short-circuit secondary wire of current transformer ?
Difference between potential transformer and current trasnformer?
The difference between current transformer and potential transformer is that the secondary of a current transformer can not be open circuited while under service whereas that of the potential transformer an be open circuited without any damage to the transformer.
What is zero current transformer?
It is a transformer with No load attach to it.
What is the reason for using a neutral current transformer on a transformer?
A current transformer is primarily used at the neutral point of a transformer for earth fault protection. A neutral current transformer will measure any ground fault current which will essentially flow from the star point of the transformer. A fault-detection device other devices is connected to the current transformer and, if the fault current exceeds a certain trigger value, the fault-detection device will give a trip command to an earth-fault relay to disconnect the supply of electricity to the transformer.
