http://wiki.answers.com/Q/What_is_The_tolerance_for_a_08mm_H12_hole"
H6 tolerance for 95 mm hole is +0.022/0
Tolerances H7 23DIA for hile is +0.021/-0.000 ///MUKI
UPPER TOLERANCE: 0.0MM LOWER TOLERANCE: -.062MM Source: Michelin Quality Requirements Manual 1993
unilateral tolerance is a process of giving tolerance in one direction only ex if 10 is the basic dimension then the unilateral tolerances for it an be -0.007 or -0.004 etc..... but should be inthe same direction
Mechanical tolerance is the permissible limits or limits of variation in physical dimension. This can also be defined as the limit between a bolt and a nut.
12 mm to 0.4 mm in height than allowed.
H6 tolerance for 95 mm hole is +0.022/0
h stands for standard hole in tolerance
.08mm
Tolerances H7 23DIA for hile is +0.021/-0.000 ///MUKI
10H7 (Hole!- negative cote) (biggest) is from +10,018 to +10,000 tolerance. 10h7 (shaft - positive cote) is from +10,000 to +9,982 tolerance.
+0.021 -0.00
Lu h12
According to ISO R286 The tolerance for a 16mm H9 hole is: 16mm +0.000mm 16mm +0.043mm
ø60 mm (+0.348/+0.340)
.06mm intake, .08mm exhaus
It is the range on what is allowable on a dimension. If the tolerance on a Ø.500 hole is ±.003, the actual part could measure Ø.497 to Ø.503