http://www.speciation.net/Public/Objects/Glossary/index.html?
we_objectID=299&rb_select_l=B&rb_search=&PHPSESSID=363d
Glossary ---- blank solution
1. a solution that does not contain a detectable amount of the analyte of interest. The
blank solution is typically used for calibration purposes. Depending on its purpose the
following blank solutions can be defined:
Calibration blank (the solution used for creating the zero concentration point of the
calibration graph; this solution contains only the diluent used for making the standard
solution)
2. Reagent blank (a blank solution that contains the reagents used to dissolve the
samples such as acids used for digestion; the reading for this solution is typically
substracted from sample readings)
3. Method blank (a blank solution that has been handled similar to a sample, and to
which the same reagents have been added, that had contact to the same type of vessels
and that was treated by a similar procedure. This solution than is handled to monitor
any type of contamination taking place with the method used.
The correct treatment of the analytical result for the blank solution does have a
significant effect on the correctness of analytical results, especially for samples having
analyte concentrations close to the limit of quantitation. Especially the measurement of
the reagent and method blank must be well differentiated from the baseline correction.
A blank solution is a solution that does not contain the analyte of interest. It is used as a baseline reference in analytical techniques to account for any interference or background signal in the measurements.
To trace the sources of contamination introduced artificially blank solution is used. In instruments such as calorimeter, it also used for calibration.
In a solution the solute is dissolved by the solvent.
we make blank solution because to make the zero absorbance of the substance other then analyte.
A reference solution was used in order to see what reaction happens between a test reagent and a solution with a high value of the ions being tested. A blank was used to show that there is no reaction when the ion being tested for is not present in the solution.
AS silver ions first react with Cloride ions in the sample(equivalence point) and when all the chloride ions are consumed we have to add more silver nitrate solution to increase its concentration to a level where it can precipitate chromate ions as silver chromate precipites (reddish brown ppts) this is the end point . so remove this error of equivalence point detection we take the same volume of indicator (chromate solution) in a flask labelled blank and add water into this flask (the same volume as that of sample solution) and then titrate this blank labelled flask with standard silver nitrate solution and note the volume of titrant consumed (blank volume),then calculations for real equivalence point can be made as: equivalence point=(end point)-(blank volume)
During an experiment for chemistry, if an indicator will not work due to the lack of a reactant, the reactant can be added. You must then compensate for the added amount by creating a solution of the indicator and the the same amount of the reactant. The volume required in the blank titration must then be subtracted from the other results to obtain quality results. This is an indicator blank and how it is used.
The blank solution is used to be compared with a solution containing a component to be determined; the blank solution is supposed to be uncontaminated by this substance. The blank solution is important for the calibration of instruments.
In a solution the solute is dissolved by the solvent.
The solution of liquid is blank secret!
The solution of liquid is blank secret!
Failure at life
we make blank solution because to make the zero absorbance of the substance other then analyte.
A reference solution was used in order to see what reaction happens between a test reagent and a solution with a high value of the ions being tested. A blank was used to show that there is no reaction when the ion being tested for is not present in the solution.
Most likely a blank solution (water or buffer).
A solution.
A suitable reagent blank for measuring the absorbance of a protein solution mixed with Bradford reagent at 595nm would be a blank containing all components of the reaction except the protein sample, such as water or buffer mixed with the Bradford reagent. This blank will account for any background absorbance contributed by the reagent itself, allowing for a more accurate measurement of the protein concentration.
the reference blank should contain everything found in the sample solution except the substance you are trying to analyze or measure.
solution