There are two pumps the primary and the secondary pump. The primary is the chilled water pump which is what pumps cold water throughout the building and the secondary circulates the water.
poos
It stand for commercial hot water... u may also interested in CHP---Combined heat and power CWP-- Condenser water pump CW - Chilled water pump
just multiply pump capacity by 3
As the chilled water system is a close system and basically consist of two loops i.e one loop from pump discharge to load & second loop from load to pump suction.Now,the effect of pressure drop will be more prominent in the second loop ,after the flow exit the load.Hence we have to alleviate the pressure where the effect of pressure loss & small water requirement is more prominent and i.e the suction side of the pump.
at end of the chilled water return header, before entering in to suction of the primary pump and chiller anand
You are probably referring to Absorption refrigeration. Try Google.
You can observe water droplets on the surface of a chilled bottle because the temperature of the atmosphere is a different temperature to that of the temperature in the chilled bottle.
Um, try this site to know: http://www.engineeringtoolbox.com/chilled-water-d_955.html .
Chilled water flow in gpm x difference in chilled water temperature/24
PRIMARY CHILLED WATER PUMPS ARE SELECTED TO FULFILL THE REQUIREMENTS OF THE CHILLER WHERE AS SECONADRY CHILLED WATER PUMPS TO SUPPLY CHILLED WATER TO THE LOAD. FOR EXAMPLE TO THE FAN COIL UNITS & AIR HANDELING UNITS. IN NORMAL PRACTICE THE SECONDARY CHILLED WATER PUMPS ARE APPLIED WITH VARIABLE FREQUENCY (SPEED) DRIVE WHILE PRIMARY WITH CONSTANT SPEED, IN THIS ALSO PRIMARY CHILLED WATER PUMPS CAN BE USED WITH VFD SYSTEM. AIJAZ AHMED JALBANI MECHANICAL ESTIMATION ENGINEER EMIRATES TECHNICAL & THERMAL SYSTEMS L.L.C
This link has schematic diagrams that's should help you draw a chilled water system http://www.jmpco.com/schemat.htm
my back hair