A digital audio jack serves the same purpose as an analog audio jack, only it transmits a signal that is digital (1s and 0s) instead of analog (waveform).
Speakers are analog devices. There is no cable and connector that will connect a digital audio jack to a speaker without a digital to analog conversion and an amplifier. If the audio output is digital, you will need a compatible amplifier that has the same digital input. Then you will need to link the amplifier to the speaker with exterior grade cable.
A coaxial digital output (usually an RCA jack) can connect to a digital optical input using a coaxial to optical digital converter. This is a small box that goes in between the two products.
Digital audio coding is the process in which audio is stored and recreated through digital means. It may encorporate digital audio compression, modulation methods and sample resolutions and frequencies.
Yes for digital audio if your Sony has a Digital Coax connection.
Echo Digital Audio was created in 1980.
Digital Audio Tape was created in 1987.
Digital audio coding is the process in which audio is stored and recreated through digital means. It may encorporate digital audio compression, modulation methods and sample resolutions and frequencies.
You have to plug the audio device's connector into the optical connection on the back of the system. The connection is next to the HDMI jack. The audio device must also be digital, not analog.
An audio jack and an audio plug are the same thing
An optical audio cable is used to transmit digital audio (AC-3) signal from the source to the receiver, such as from a DVD player to a digital audio amplifier/receiver. You can transmit 5.1 dolby digital or DTS surround sound with an optical audio cable, same as digital coaxial audio cable.
Yes, the devices need to have Digital Audio Input and Outputs for this to be possible.
You will need a digital audio switchbox or a surround sound receiver with 2 digital inputs.