0
oast
The hop kilns are known as oast houses
hops are placed in the oast houses after picking to dry out
ready to be used by the brewing industry,
Most English oast houses are located in the county of Kent.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Name of a hop kiln?
a hop kiln is used in drying hops. This kiln is called an oast.
Which type of drying should be used for indoor furniture?
Kiln Drying
What has the author Edwin Knight written?
Edwin Knight has written: 'Kiln-drying western softwoods' -- subject(s): Kilns, Drying, Lumber
What is kiln seasoning?
Kiln seasoning is the most effective commercial process for drying wood. It accelerates the moisture-removal process through the use of external energy.
What name is given to the process that reduces moisture content of wood before it can be used?
Kiln drying
What has the author J H Jenkins written?
J. H. Jenkins has written: 'Kiln-drying British Columbia lumber' -- subject(s): Lumber, Drying
What has the author Marvin L Stone written?
Marvin L. Stone has written: 'Modeling of deep bed hop drying' -- subject(s): Hops, Drying
What are different methods of wood seasoning?
Broadly, there are two methods by which timber can be dried: (i) natural drying or air drying, and (ii) artificial drying.[edit] Air dryingAir drying is the drying of timber by exposing it to the air. The technique of air drying consists mainly of making a stack of sawn timber (with the layers of boards separated by stickers) on raised foundations, in a clean, cool, dry and shady place. Rate of drying largely depends on climatic conditions, and on the air movement (exposure to the wind). For successful air drying, a continuous and uniform flow of air throughout the pile of the timber needs to be arranged (Desch and Dinwoodie, 1996). The rate of loss of moisture can be controlled by coating the planks with any substance that is relatively impermeable to moisture; ordinary mineral oil is usually quite effective. Coating the ends of logs with oil or thick paint, improves their quality upon drying. Wrapping planks or logs in materials which will allow some movement of moisture, generally works very well provided the wood is first treated against fungal infection by coating in petrol/gasoline or oil. Mineral oil will generally not soak in more than 1-2 mm below the surface and is easily removed by planing when the timber is suitably dry. [edit] Kiln dryingThe process of kiln drying consists basically of introducing heat. This may be directly, using natural gas and/or electricity or indirectly, through steam-heated heat exchangers, although solar energy is also possible. In the process, deliberate control of temperature, relative humidity and air circulation is provided to give conditions at various stages (moisture contents or times) of drying the timber to achieve effective drying. For this purpose, the timber is stacked in chambers, called wood drying kilns, which are fitted with equipment for manipulation and control of the temperature and the relative humidity of the drying air and its circulation rate through the timber stack (Walker et al., 1993; Desch and Dinwoodie, 1996). Kiln drying provides a means of overcoming the limitations imposed by erratic weather conditions. In kiln drying as in air drying, unsaturated air is used as the drying medium. Almost all commercial timbers of the world are dried in industrial kilns. A comparison of air drying, conventional kiln and solar drying is given below:Timber can be dried to any desired low moisture content by conventional or solar kiln drying, but in air drying, moisture contents of less than 18% are difficult to attain for most locations.The drying times are considerably less in conventional kiln drying than in solar kiln drying, followed by air drying. This means that if capital outlay is involved, this capital is just sitting there for a longer time when air drying is used. On the other hand, installing an industrial kiln, to say nothing of maintenance and operation, is expensive.In addition, wood that is being air dried takes up space, which could also cost money.In air drying, there is little control over the drying elements, so drying degrade cannot be controlled.The temperatures employed in kiln drying typically kill all the fungi and insects in the wood if a maximum dry-bulb temperature of above 60 °C is used for the drying schedule. This is not guaranteed in air drying.If air drying is done improperly (exposed to the sun), the rate of drying may be overly rapid in the dry summer months, causing cracking and splitting, and too slow during the cold winter months.The significant advantages of conventional kiln drying include higher throughput and better control of the final moisture content. Conventional kiln and solar drying both enable wood to be dried to any moisture content regardless of weather conditions. For most large-scale drying operations solar and conventional kiln drying are more efficient than air drying.Compartment-type kilns are most commonly used in timber companies. A compartment kiln is filled with a static batch of timber through which air is circulated. In these types of kiln, the timber remains stationary. The drying conditions are successively varied from time to time in such a way that the kilns provide control over the entire charge of timber being dried. This drying method is well suited to the needs of timber companies, which have to dry timbers of varied species and thickness, including refractory hardwoods that are more liable than other species to check and split.The main elements of kiln drying are described below: a) Construction materials: The kiln chambers are generally built of brick masonry, or hollow cement-concrete slabs. Sheet metal or prefabricated aluminum in a double-walled construction with sandwiched thermal insulation, such as glass wool or polyurethane foams, are materials that are also used in some modern kilns. Some of the elements used in kiln construction. However, brick masonry chambers, with lime and (mortar) plaster on the inside and painted with impermeable coatings, are used widely and have been found to be satisfactory for many applications. b) Heating: Heating is usually carried out by steam heat exchangers and pipes of various configurations (e.g. plain, or finned (transverse or longitudinal) tubes) or by large flue pipes through which hot gases from a wood burning furnace are passed. Only occasionally is electricity or gas employed for heating. c) Humidification: Humidification is commonly accomplished by introducing live steam into the kiln through a steam spray pipe. In order to limit and control the humidity of the air when large quantities of moisture are being rapidly evaporated from the timber, there is normally a provision for ventilation of the chamber in all types of kilns. d) Air circulation: Air circulation is the means for carrying the heat to and the moisture away from all parts of a load. Forced circulation kilns are most common, where the air is circulated by means of fans or blowers, which may be installed outside the kiln chamber (external fan kiln) or inside it (internal fan kiln). Throughout the process, it is necessary to keep close control of the moisture content using a moisture meter system in order to reduce over-drying and allow operators to know when to pull the charge.[2] Preferably, this in-kiln moisture meter will have an auto-shutoff feature.
What are the different types of seasoning timber?
Seasoning of timberSeasoning is the name given to the methods of drying timberThere are two methods by which timber can be dried:(i) natural drying or air drying, and(ii) artificial drying.Air dryingAir-drying is the drying of timber by exposing it to the air. The technique of air-drying consists mainly of making a stack of sawn timber (with the layers of boards separated by stickers) on raised foundations, in a clean, cool, dry and shady place. Rate of drying largely depends on climatic conditions, and on the air movement (exposure to the wind). For successful air-drying, a continuous and uniform flow of air throughout the pile of the timber needs to be arranged. Coating the planks with any substance that is relatively impermeable to moisture can control the rate of loss of moisture; ordinary mineral oil is usually quite effective. Coating the ends of logs with oil or thick paint, improves their quality upon drying. Wrapping planks or logs in materials, which will allow some movement of moisture, generally works very well provided the wood is first treated against fungal infection by coating in petrol/gasoline or oil. Mineral oil will generally not soak in more than 1-2 mm below the surface and is easily removed by planning when the timber is suitably dry.Natural seasoning of timberKiln dryingThe process of kiln drying consists basically of introducing heat. This may be directly, using natural gas and/or electricity or indirectly, through steam-heated heat exchangers, although solar energy is also possible. In the process, deliberate control of temperature, relative humidity and air circulation is provided to give conditions at various stages (moisture contents or times) of drying the timber to achieve effective drying. For this purpose, the timber is stacked in chambers, called wood drying kilns, which are fitted with equipment for manipulation and control of the temperature and the relative humidity of the drying air and its circulation rate through the timber stackKiln drying provides a means of overcoming the limitations imposed by erratic weather conditions. In kiln drying as in air drying, unsaturated air is used as the drying medium. Almost all commercial timbers of the world are dried in industrial kilns. A comparison of air drying, conventional kiln and solar drying is given below:1. Timber can be dried to any desired low moisture content by conventional or solar kiln drying, but in air drying, moisture contents of less than 18% are difficult to attain for most locations.2. The drying times are considerably less in conventional kiln drying than in solar kiln drying, followed by air-drying.1. This means that if capital outlay is involved, this capital is just sitting there for a longer time when air-drying is used. On the other hand, installing an industrial kiln, to say nothing of maintenance and operation, is expensive.2. In addition, wood that is being air-dried takes up space, which could also cost money.3. In air-drying, there is little control over the drying elements, so drying degrade cannot be controlled.Air-drying is the drying of timber by exposing it to the air. The technique of air-drying consists mainly of making a stack of sawn timber (with the layers of boards separated by stickers) on raised foundations, in a clean, cool, dry and shady place. Rate of drying largely depends on climatic conditions, and on the air movement (exposure to the wind). For successful air-drying, a continuous and uniform flow of air throughout the pile of the timber needs to be arranged. Coating the planks with any substance that is relatively impermeable to moisture can control the rate of loss of moisture; ordinary mineral oil is usually quite effective. Coating the ends of logs with oil or thick paint, improves their quality upon drying. Wrapping planks or logs in materials, which will allow some movement of moisture, generally works very well provided the wood is first treated against fungal infection by coating in petrol/gasoline or oil. Mineral oil will generally not soak in more than 1-2 mm below the surface and is easily removed by planning when the timber is suitably dry.Natural seasoning of timberKiln dryingThe process of kiln drying consists basically of introducing heat. This may be directly, using natural gas and/or electricity or indirectly, through steam-heated heat exchangers, although solar energy is also possible. In the process, deliberate control of temperature, relative humidity and air circulation is provided to give conditions at various stages (moisture contents or times) of drying the timber to achieve effective drying. For this purpose, the timber is stacked in chambers, called wood drying kilns, which are fitted with equipment for manipulation and control of the temperature and the relative humidity of the drying air and its circulation rate through the timber stackKiln drying provides a means of overcoming the limitations imposed by erratic weather conditions. In kiln drying as in air drying, unsaturated air is used as the drying medium. Almost all commercial timbers of the world are dried in industrial kilns. A comparison of air drying, conventional kiln and solar drying is given below:1. Timber can be dried to any desired low moisture content by conventional or solar kiln drying, but in air drying, moisture contents of less than 18% are difficult to attain for most locations.2. The drying times are considerably less in conventional kiln drying than in solar kiln drying, followed by air-drying.1. This means that if capital outlay is involved, this capital is just sitting there for a longer time when air-drying is used. On the other hand, installing an industrial kiln, to say nothing of maintenance and operation, is expensive.2. In addition, wood that is being air-dried takes up space, which could also cost money.3. In air-drying, there is little control over the drying elements, so drying degrade cannot be controlled.
What are hops driers called?
The hops are dried in an oast, which may have several kilns sometimes known as kell the old word for kiln. An oast kell is typically a three story round building with perforated flooring for the upper floors. You can learn more at http://en.wikipedia.org/wiki/Oast Michael
What has the author Frederick O Lemery written?
Frederick O. Lemery has written: 'Dry kiln defects' -- subject(s): Drying, Wood, Defects, Lumber
What is the name of the oven in which pottery is fired?
Kiln
