0
A tray place under the cylinder designed to catch any water that may leak and also available with an overflow to take the water away to a drain or outside, preventing structural damage caused by water leaks.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Why is there water in your hot water cylinder tray?
There is either a leak or the pressure valve is blowing off sometimes. Check the heat regulator to make sure it is not set too high. Should be 132 max.
How do you find how much propane you have left using hot water and how does it work?
By pouring hot water on a propane cylinder you are heating the metal cylinder. The liquid propane in the cylinder is cold and forms condensation on the outside of the cylinder showing the level of propane remaining in the tank much like condensation forming on a glass of ice water on a hot day.
Why haemolysate kept in ice cold water?
Tray
What is a sentence using the word burnt?
Whilst cooking the Sunday lunch I burnt my hand on the hot roasting tray.
Do orbeez grow bigger in cold or hot water?
In hot water
Which ice tray freezes quicker the hot water tray of the cold water tray?
The hot water tray because some of the water evaporates, and it takes less time to freeze.
Why is there water in your hot water cylinder tray?
There is either a leak or the pressure valve is blowing off sometimes. Check the heat regulator to make sure it is not set too high. Should be 132 max.
What does cyl stand for in a floor plan?
Hot water
Why is there a overflow pipe on top of the hot water cylinder?
This is to allow for expansion of the hot water-- otherwise the cylinder would blow up.
What is a Hot Water Cylinder?
A tray place under the cylinder designed to catch any water that may leak and also available with an overflow to take the water away to a drain or outside, preventing structural damage caused by water leaks.
Hot water cylinder works?
i dont get this question?
When filling an ice tray what's best hot or cold water?
cold water is best because it will freeze faster
How do you find how much propane you have left using hot water and how does it work?
By pouring hot water on a propane cylinder you are heating the metal cylinder. The liquid propane in the cylinder is cold and forms condensation on the outside of the cylinder showing the level of propane remaining in the tank much like condensation forming on a glass of ice water on a hot day.
What are the types of Hot Water Cylinders?
There are four main types of hot water cylinders: Direct hot water cylinders. These cylinders have an immersion heater inside that heats the water directly. They are the most basic type of hot water cylinder, and they are relatively inexpensive. However, they can be inefficient, and they can take a long time to heat up the water. Indirect hot water cylinders. These cylinders use a heat exchanger to heat the water. The heat exchanger is connected to a boiler, which heats the water from the mains supply. Indirect hot water cylinders are more efficient than direct hot water cylinders, and they can heat up the water more quickly. However, they are also more expensive. Vented hot water cylinders. These cylinders are connected to a cold water tank. The cold water tank is located above the cylinder, and it provides the water that is used to heat the water in the cylinder. Vented hot water cylinders are the most common type of hot water cylinder in the UK. They are relatively inexpensive, and they are easy to install. However, they can be inefficient, and they can lose heat through the venting system. Unvented hot water cylinders. These cylinders are not connected to a cold water tank. Instead, they are connected directly to the mains water supply. Unvented hot water cylinders are more efficient than vented hot water cylinders, and they do not lose heat through the venting system. However, they are also more expensive, and they require a special type of expansion vessel. The type of hot water cylinder that is right for you will depend on your individual needs and requirements. If you are looking for an inexpensive option, then a direct hot water cylinder may be a good choice. If you are looking for an efficient option, then an indirect hot water cylinder may be a better choice. If you are concerned about losing heat, then an unvented hot water cylinder may be the best option for you.
What principle is being used when heat is transmitted between the boiler and cylinder in a hot water system?
heat is transmitted by gravity between the boiler and cylinder ina hot water system. this is using the principle of?
can anyone tell me what piece of equipment works best for holding pasta dishes hot without overcooking or drying them out?
I would use a standard heat tray, like a caterer would have; You could take a can, filled with hot water, and place it inside the heat tray, directly over the burner, with the pasta; when you keep the tray covered, the steam from the water in the can should prevent the pasta from drying out.
In order to permit an indirect hot water cylinder to be emptied a draining valve should be installed?
At the lowest point on the hot water distributing pipework system
