It refers to the diameter of the screw. More precisely, it is a 0.138" diameter screw. You can get it in with various head style and thread pitch.
.125
#4 Screw use a 1/16" Drill #6 Screw use a 3/32" Drill #8 Screw use a 1/8" Drill #10 Screw use a 9/64" Drill #12 Screw use a 11/64" Drill #14 Screw use a 3/16" Drill
999999
length of the screw, and number of turns per inch
If in London it is important to know that an English size 6 is not the same as an American size 6. So if you are a size 4 in American clothing then a size 6 in UK clothing is perfect for you.
2 x 3.14+ (number of screws) / number of threads
The next size larger from a number 6 size screw.
A number 4 size screw comes from the fact that it is the fourth in a series of screw sizes. The screw sizes start at number 0 with a diameter of 0.060" and increase by 0.013" for each size larger.
Metric size #6 shank, 32 is thread pitch per inch. The bigger the no. the bigger the screw size.
#4 Screw use a 1/16" Drill #6 Screw use a 3/32" Drill #8 Screw use a 1/8" Drill #10 Screw use a 9/64" Drill #12 Screw use a 11/64" Drill #14 Screw use a 3/16" Drill
The screw size is a 6-32. This relates to diameter size of #6 and 32 threads per inch. The length for receptacles is usually 3/4 of an inch.
The listed size of a #4 screw is 0.1120 inch. In fractions that's approximately 7/64
# 6 screw is one of many US Numbers screws (where is pitch makes no difference in diameter) All Number screws are measured as follows: O.D = 0.060" + N(0.013") , where's N is the number of the screw , thus the diameter of # 6 screw is: 0.060" + 6(0.013") = 0.060" + 0.078" = 0.138"
The letters on a screw refer to the type of screw head and the size of the screw. For example, "PH" typically indicates a Phillips head screw and the following number represents the size of the screw. Other common letters include "SL" for slotted screws and "Hex" for hexagonal screws.
6 inches by screw yiou
6 is the diameter of the shaft and 32 is the number of threads it has per inch.
It depends on your motherboard specifications. But the screw size that fits most is: • Head: Hex / Phillips • Thread: 6-32 • Length: 5/32 in (4mm)
Size 6 shoes are bigger. The bigger the number, the bigger the shoes!