A compound mitre saw can cut angles in both directions and ALSO tilt the blade to cut compound angles, This is important in cutting things like crown moulding.
A siding compound mitre saw is one that goes up an down on a hinge at the rear and angles sideways just like a regular mitre saw , but as well as all this, the motor and blade can slide forwards on a bar (or 2 bars) to allow wider cuts.
A miter saw is a saw hinged to a baseplate so it comes down to operate. It can be angled in either direction horizontally and it can 'lean' or be angled vertically.
Cutting angles, usually for trim and molding.
Usually wood either straight across the grain or at an angle. Metal can be cut with one with the right blade in it. PVC and other plastics can be cut with the same blade as wood.
A compound mitre saw can cut angles in both directions and ALSO tilt the blade to cut compound angles, This is important in cutting things like crown moulding.
A compound mitre saw can turn 45 degrees either side and also angle 45 degrees from the vertical. Both can be done at the same time making this saw very versatile.
A miter saw is used to make accurate angled cuts in wood, most often to moldings and trim.
The mitre saws forward and the back saws backford.
Mitre or jigsaw
mitre saw,mitre gauge,measuring tape,mortise gauge,mallet
Yes
It is a mitre saw that only angles one way.
A compound mitre saw is needed because it will make it easier to make complex cuts such as crosscuts that can be essential if you are a woodworking hobbyist.
Cutting angles on wood.
Cutting angles, usually for trim and molding.
A mitre saw can cut wood at any angle you wish in both directions.
The motorised Mitre saw can cut materials at very exact angles.
A skilsaw, a mitre saw and a nail gun.
To make accurate 90 degree and angle cuts .