Transformation are nothing but changing the image in to different forms by
1)scaling
2)translation
3)rotation
scaling:increasing the size of the actual image
translation:moving image from one position to another position
rotation:changing the angle of image
and yaw
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. Commonly, Transformers are used to increase or decrease the voltages of alternating current in electric power applications.
An electrical device that either raises or lowers the voltage of electricity.
A device used to increase or decrease electricity's voltage and current.
A device that increases or decreases the voltage of alternating current. Transformers are used to increase or decrease the voltage in a conductor. They either step up or step down the voltage being transmitted. electric device that changes voltage in direct proportion to currents and in inverse proportion to the ratio of the number of turns of its primary and secondary windings (2) see primary and secondary
Explanation: The conversion from one voltage level to another is usually done by transformers. A transformer reduces or increases the voltage. Transformers are used, for example, to reduce the high voltage in overhead power lines to the low voltage in our sockets.
A thing that transforms, that changes shape or changes another thing's shape; A static device consisting of winding(s), with or without taps, with or without a magnetic core for introducing mutual coupling by induction between circuits
Transformers help to transfer electrical energy between two circuits.
Transformers are used to step-up or to step-down voltages and (in the case of mutual transformers) to electrically-isolate the secondary circuit from the primary circuit.
Center tap transformer is the such kind of transformer that is made to a point half way along a winding of a transformer.
why should we use pulse transformer rather than ordinary transformer
The function of the radiator ban in a transformer is to cool the transformer oil.
A transformer is fundamentally a set of coils; therefore, a transformer is an inductive load. However, by "transformer load", you seem to mean "the load that is connected to a transformer". Whether that load is inductive or capacitive depends mostly on what is hooked up to the transformer.
B.I.L. stands for Basic Impulse Level for the transformer. It should be on the faceplate of the transformer.
a hole transformer
Transformer has windings
yes we can place auto transformer in place of original transformer
The function of fans in a transformer is to regulate the transformer's temperature.
A transformer that increases voltage is a step-up transformer.
Center tap transformer is the such kind of transformer that is made to a point half way along a winding of a transformer.
An isolation transformer is usually a ferromagnetic transformer. The question needs to be framed more usefully.
because the copper is saved in the auto transformer that is the ratio of weights of copper in auto transformer to normal transformer is (1-(1/a)) where a is transformer ratio
The difference between current transformer and potential transformer is that the secondary of a current transformer can not be open circuited while under service whereas that of the potential transformer an be open circuited without any damage to the transformer.
A transformer does many things.
Transformer Radio Meters
density of transformer is 1.98