Turnout Gear, also called "Personal Protective Equipment" (PPE), is their:
Uniforms are different by region and department. Also, a few other factors can affect this. Turnout gear is the gear that is worn for personal protection at the scenes of calls.
23 CFR 655 requires, at minimum, retroreflective turnout gear for firefighters. 23 CFR 655 creates this requirement by making the standard statements in the Manual on Uniform Traffic Control Devices (MUTCD) federal law.
Firefighters' duty uniforms, the ones they wear around the station, are made from cotton. They usually wear cotton twill pants and cotton shirts. Cotton is preferred because, when they go out on fires, they can put their turnout gear on over it and not have to worry about their clothes melting to their skin. Firefighters' turnout gear is made of "PBI Gold" fabric. It's made of a fabric called "polybenzimidazole" woven with kevlar. PBI fabric is unique in that it is completely unable to burn or melt, even if you poured gasoline on it and set it on fire.
Firefighters wear turnout gear, or bunker gear into fires. There are three layers to structural firefighting gear. Outer Layer (water resistent, protects us from punture), this layer is usually made of a Nomex/Kevlar blend. Thermal Layer (just like it sounds, protects us from heat), and the Moisture Barrier (keeps most moisture out) this is also usually made from some sort of nomex/kevlar blend.
The protective clothing a firefighter wears is called turnout gear (or bunker gear). Firefighters are said to "turn out" for a fire so that they can suppress it, and this dates back to the early days of the so-called modern era of firefighting. Early firefighters were designated and compensated to fight fires, but did not reside at the station. Instead, they'd "turn out" all dressed up in their "turnout gear" and ready to go. It is probable that the origin of the term "turnout gear" or just "turnouts" lies in that idea.
It depends on the turnout gear that your local fire department uses, the CSFD's turnout can withstand up to 500 degrees
Firefighter turnout gear may be taken out of service due to various reasons, including damage such as tears, cuts, or rips that compromise its integrity, exposure to heat or chemicals that can degrade the material, excessive wear and tear, or expiration of its recommended lifespan. Additionally, if the gear fails to meet safety standards or regulatory requirements, it may be deemed unfit for use and taken out of service.
The term "turn out gear" is used to identify the basic protective clothing a firefighter puts on before going into a hazardous environment, usually a fire situation. There are other terms for this basic protective equipment, such as: "bunker gear" or "quick hitch", which implies a fast or rapid way to put this clothing on when responding to an emergency at any hour of the day or night. The basic components of "turn out gear" are usually: the rubber steel toe boots, the fire resistant pants, fire resistant coat, fire resistant gloves, fire resistant nomex head hood, and helmet. Hope this helps!
A Protective Uniform of course!
When an emergency call goes through 911 dispatch the Dispatcher will notify the correct emergency services (,police,Fire-Rescue,Emergency Medical services). Then the dispatcher sounds the alarm at the station a loudspeaker will give information regarding the emergency (unit or station number, Emergency, adress, crossstreet and timeout. Firefighters then run to the station garage. Then the firefighters check the map and get there gear. Firefighters wear special fireproof clothing to keep safe from fires or explosions. This clothing is called turnout gear. There pants are tucked in ther boots to save time while there coat and helmet are hanging in a cubby or on a hook. They then run to the engine and start it up while turning the lights and sirens on and exit the station to the emergency. Firefighters are trained and equipped to handle other emergencies then fires such as vehical accidents, rescue calls, medical emergencies, fires , searh and rescue and many other emergencies.
Globe Manufacturing Company LLC, Pittsfield New Hampshire, Globe Firefighter Suits.
Bunker Gear normally weighs about 15-25lbs depending on the size. plus the gear which in some cases can weigh up to 50+ lbs