The AC clutch is on the front of the compressor where the belt rides. When power is applied to the clutch it engages to turn the compressor. It is basically a magnet a/c compressor clutch is the ound thing on the front of the compressor with pulley wheel attached. this clutch is an electro magnetic clutch that when electricity is supplied, engages so as the a/c compressor is driven ,which can then pump freon thru the ac system
how do you replace the AC compressor clutch on 2006 liberty
The ac compressor clutch is mounted on the front of the compressor and is a replaceable part. However depending on the complexity of the clutch change out it may be overall better to change the compressor and clutch together.
no, unless u have to remove the compressor unit. The clutch can be replaced with out removing the compressor if you have room to do it.
If the AC pulley is locking up when the ac compressor clutch engages, it's not a clutch problem, it's a compressor problem. But yes, the AC clutch can usually be replaced separately. The problem is, if the clutch is worn out the compressor is probably worn out as well. It usually isn't that much more to replace the whole thing.
The clutch bearing for an AC compressor is located in the center of the clutch. If the bearing goes bad, then the clutch is replaced as a whole part rather than changing the bearing.
At the front of the AC compressor....
If the compressor is bad or noisy and the AC clutch is okay try unplugging the AC clutch fuse or relay.
The AC Clutch on that year truck is conected to the compressor, Unfortunately there is no way to separate the both. You must pick up a new compressor if your clutch has failed...
AC Compressor clutch relay may be stuck. Remove the relay and see if the clutch releases.
The AC clutch cannot be replaced without physically removing the compressor on a 1997 Mercury Sable. The compressor and magnetic plate must be removed before you can access the clutch.
Do y need puller to replace ac clutch on compressor. 2004 expition
The a/c clutch will not engage and the compressor will not come on.............