All the settings from the BIOS are stored in a chip which is located on the motherboard. That chip is called EEPROM (electrically erasable PROM).BIOS configuration setting is store in special memory called CMOS. Which is little powered by a battery. RAM is volatile so when computer turned off, all data lost.This can also happen with CMOS but due to this purpose it is powered by battery. It consumption of power is very low and it can store data for 1 year.CMOS stand for "Complementary Metal Oxides Semiconductor".
BIOS configuration data is available in several different forms. This data is actively stored on the motherboard of each individual personal computer.
It's a mixture of things. BIOS, CMOS, Operating system.
BIOS stands for basic input-ouput-system and it is how the machine reads and parses data
EEPROM (Electrically erasable programmable read-only memor)
The BIOS saves data on a CMOS chip that is still volatile like other memory, but it is typically powered by a CR2032 button battery. If this battery fully discharges or is removed, the data stored in CMOS is lost and the BIOS settings will automatically be reset to default.
Bios rom
The process of upgrading or refreshing the ROM BIOS chip is called flashing BIOS. The power menu in BIOS setup allows you to configure automatic power saving features.
there is no bios setup program but BIOS stands for basic input output system
Data stored in CMOS can be altered using a CMOS editor program. CMOS commonly stores the computer's BIOS and its content can be changed using the inbuilt BIOS settings utility.
BIOS stands for Basic Input/output System. It is software that is built into computers. A BIOS that can be reprogrammed using software is called EPROM.
Serial Presence Detect: modules communicate their capacity and features to BIOS at start up.