0
EN8 also know as 080M40. An unalloyed medium carbon steel. EN8 is a medium strength steel, good tensile strength. Suitable for shafts, stressed pins, studs, keys etc. AISI 1040.
Available as normalised or rolled. EN8 is supplied as round drawn/turned, round hot rolled, hexagon, square, flats and plate.
Wiki User
∙ 11y ago
Wiki User
∙ 9y agoEN8 is a through-hardening medium carbon steel which is often used for making axles, shafts, gears, bolts, and studs. EN8 can be machined very easily. Mild steel is the least expensive kind of steel as well as the most commonly used. Mild steel is weldable, very hard, and very durable even though it rusts. Mild steel is less brittle, and able to flex to avoid breakage.
Wiki User
∙ 14y agoEN8D is a carbon steel, detailed in British Standard BS970, I have an old copy of the standard, and the composition is as follows; C 0.40 to 0.45%, Si 0.05 to 0.35%, Mn 0.70 to 0.9%, S
Add your answer:
Earn +20 pts
What is the max.hardness acheived in En8 material . Can anyone tell me what is EN8 Heat Treatment Standard conditions?
normally in soft cindition (before heat treatment) it is 200 to 240 BHN
What is tensile strength of EN24 series of steel?
the yield strength of EN8 material is 465MPa.
What is the magnetic permeability values of En8 steel and iron powder?
what is magnetic ppermeability of EN8
What is the maximum hardness can be achieved in EN8 material by hardening process?
Through hardening Process & Polymer quench 20% - As quench Required hardness - 35 - 40 hrc.
What is the difference between en8 and en24?
En8 is low carbon steel and it can be toughned. En24 is medium carbon steel and it is generally called forged steel.
What is the maxhardness acheived in En8 material after heattreatment?
what is the normal hardness of en8 material
In EN8 material what does EN specifies?
european norms
What is the max.hardness acheived in En8 material . Can anyone tell me what is EN8 Heat Treatment Standard conditions?
normally in soft cindition (before heat treatment) it is 200 to 240 BHN
What is tensile strength of EN24 series of steel?
the yield strength of EN8 material is 465MPa.
What is allowable bending stress for en-8 shaft material?
allowable bending stress for en8
What is the allowable bending stress for EN-8 shaft material?
allowable bending stress for en8
What is the magnetic permeability values of En8 steel and iron powder?
what is magnetic ppermeability of EN8
What is hardness of en8?
The hardness of EN8 is usually between 500 N/mm2 and 800 N/mm2.
Is c45 is equivalent to en8?
Yes.
Is en8 equivalent to c45?
Yes.
What is the maximum hardness can be achieved in EN8 material by hardening process?
Through hardening Process & Polymer quench 20% - As quench Required hardness - 35 - 40 hrc.
Can you get T-T-T diagram of EN8?
NO because the EN8 = A B C D E F G God you should know that
