If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.
The carb on a McCullouch chainsaw can be adjusted by turning the idle mixture screws. This controls how much fuel and air are mixed inside the carburetor.
If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.
40:1 40 parts gas to 1 part oil.
If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.
need a diagram for mcculloch eager beaver chain saw
50:1 is incorrect. That mixture will not allow enough compression and the unit will be very hard to start, if at all. That mixture works well for Sthil products. If using an oil other than McCulloch, the ratio is 40:1. Brand specific McCulloch two cycle oil is 20:1.
From the official McCulloch website:"Products with two-stroke engines, the petrol must be mixed with two-stroke oil. McCulloch recommends Outdoor Accessories two-stroke oil. The petrol/oil ratio must be 50:1."
40:1 with high quality 2-stroke oil mix would be fine. http://store.chainsawr.com/
25 to 1 is the mixture for the fuel
40:1 is the fuel mixture per the manual
The fuel mixture for a 2.0 McCulloch chain saw is 32 to 1. This means that there is 1 part of 2 cycle oil mixed per 32 parts of fuel.
50-1