50:1 is incorrect. That mixture will not allow enough compression and the unit will be very hard to start, if at all. That mixture works well for Sthil products.
If using an oil other than McCulloch, the ratio is 40:1. Brand specific McCulloch two cycle oil is 20:1.
What is the proper fuel oil ratio for the 610
16 To 1
If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.
i heard the engine dispacement on the 610 it's 60 cc's so horse power will be 6.2 hp, wich its pretty good
1 oil to 40 gas.
If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.
Yes, It is a Mcculloch Pro Mac 610, Lots of parts available!
Hey, to all that use the great and powerful mccullogh's, the mixture on almost all of these saw are 40:1. Plus I put a little octane boost to help with better ignition. Hope this helps Scott @ yahoo.com
610
32:1 or 40:1 with high quality 2-stroke oil mix would be fine. http://store.chainsawr.com/
32:1 or 40:1 with high quality 2-stroke oil mix would be fine. http://store.chainsawr.com/
The fuel pump is located to the left of the eng. As you face it, just below the intake/exhaust manifold! Follow the fuel line from the tank , it takes you right to it!
20% of 610 = 20% * 610 = 0.2 * 610 = 122
610