About 10 gallons per regular wash.
3 gpm
What is the condendsate in GPM flow and what tonnage is the unit
That's tough, because dishwashers can be a lot of different sizes and come with a lot of different features. I would say 90 pounds or so is average, but there are 60 pound and 120 pound ones as well.ANS 2 - A dishwasher is usually the lightest of all appliances. I install many and most are less then 90 pounds.ANS 3 - Well the average Mexican is about 5 feet 4 inches, weighing about 165 pounds, hope that helps.
Gallons per minute. This is usually used with liquid flow, like from a pump.
52 gpm
The average warrant for a Kenmore dishwasher is around 12 months.
The average warranty for a maytag dishwasher is 12 months.
The EPA limits gas station pumps to no more than 10 gpm. The average gas station pump is between 5 and 10 gpm.
The average kitchen faucet will deliver about 2.5 gpm. Some will be more and some less.
gallon per minute (gpm).
2650 gph = 44.167 gpm
Kw x 3412 / 10000 = gpm I think
It doesn't make any difference how many sides of the pool are negative edge, only the total number of linear feet of negative edge and how level you can make the edge. The longer the edge the more important it is that it be level, because even small amounts of out of level require huge flow rates to compensate for. Approximate GPM required per linear foot for various water depths: 1/8" - 5 gpm ¼" - 10 gpm ½" - 17 gpm ¾" - 28 gpm 1" - 40 gpm 1.5" - 70 gpm 2" - 105 gpm As a minimum 5x35=175 GPM
Under 400 GPM at best (without friction)
Most domestic ones flow at a little over 2 gpm.
Yes, a water softener that put out 9gpm will be able to accommodate a home that puts out a 5 gpm.