pulse shift technique
Frequency-division multiplexing, wavelength-division multiplexing, and time-division multiplexing.
What is multiplexing and its diagram
Multiplexing is the process of combining multiple signals over one media line. There are several types of multiplexing: frequency division, time division, and wavelength division.
In analog transmission, signals are commonly multiplexed using frequency-division multiplexing (FDM)
Multiplexing techniques vary widely based on what is being multiplexed. Modern telecommunications use a very wide array of techniques including: TDM - examples: TDMA, T-carrier FDM - examples: DWDM Spatial - example: MIMO Code division - examples: CDMA Phase or polarization division - cable/satellite TV Statistcal - examples: packet mode (STS), FHSS etc etc. This is far from a complete list. I think the question needs to be more specific.
http://zone.ni.com/devzone/cda/ph/p/id/269
Does Cable television use time-division multiplexing
error correction data compression
Space division multiplexing uses spacing to separate channels in a communications link. These separations may be done by frequency, insulation, or distance (spacing). Time division multiplexing is one way of doing the spacing separation. Space division multiplexing may use other techniques, such as TDM, FDM, etc., to maintain separation so that the conversations do not collide with each other.
Address bits
multiplexing refeers to the transmission of different signals in the same channel simultaneously. There are many forms of multiplexing that can be used, including frequency division multiplexing(FDM) where individual signals are transmitted over adjacent , non overlapping frequency bands. they are transmitted in parallel and simultaneously in time. In time division multiplexing(TDM) each signal is allowd to use the whole bandwidth for a certain period of time. Multiplexing is needed so that the available channel can be used efficiently and also to save costs. There is too much to know about multiplexing, here is just a short overview. One thing that one has to know is multiple access.
circuit switching data bearer channel time-division multiplexing