it means the PDC (park distance control) does not work properly, could be damaged or faulty, could also be a coding problem. This ideally needs to be checked at your local dealer. Adamski (adam.francis@snowsgroup.co.uk)
how do you reset the pdc on a bmw
How do i remove the pdc on x5 bmw bumper
hold pdc button for 10 second and start car whilst pressed
There are several things that can cause your transmission malfunction light to come on. The most common cause is low transmission fluid.
if it is a 2003- on e60 it is right rear of boot/luggage area behind cover where battery is located under fuseboard
The engine computer has detected a malfunction and set a code.
The Park Distance Control, or PDC, is a set of sensors that allow a driver to assess the distance of an object behind them when reversing, generally to park. An acoustic signal, starting at a low frequency, increases frequency as the driver gets closer to the object (car) behind them. If one lives in a wet, snowy or very cold locale, the PDC is known to freeze up, (incorrectly) triggering the PDC FAILURE message. One's should first defrost and/or dry the PDC module (located in the trunk of the vehicle) with a hairdryer, fan or other ambient (and not dangerous) heat/air source. If the PDC FAILURE message stays on, then one may need to replace the sensor.
how many terms for pdc
Your window washer pump is not working (it is a common malfunction of all BMW's ), it is next to the water container under the hood, get it replaced! it should cost under 40$
kill myself
p= park d= distance c=control
dsquery server -hasfsmo pdc