Want this question answered?
thermal power plants are set up near the coal and oil fields because coal and oil are its basic source of energy plus to lessen the cost of production.
It gets hot or the plants could explode.
The forward current of any semiconductor device is dependent on temperature. This can cause collector current to increase in an uncompensated circuit. In the worst case, this can cause thermal runaway, and failure of the device. Often, we compensate for temperature by placing biasing limits on the demand for the transistor's gain.
Collector modulation is the amplitude modulation in which modulator varies the collector voltage of a transistor.
Yes, dramatically. Especially if we switched to hydrogen fuel cell cars and produced the hydrogen in the nuclear power plants by direct thermal conversion without generation of electricity.
thermal power plants are located in Orissa and Kerala.
Electronics are used in thermal power plants when the power from the thermal power plants are transferred to a storage source. There, electronics comes in.
Nuclear power plants do not cause thermal polution.
Examples: metal wastes, ash from thermal plants, glass wastes, wastes from buildings constructions, different used objects, used lamps, rubber, plastics etc.
Electronics are used in thermal power plants when the power from the thermal power plants are transferred to a storage source. There, electronics comes in.
No an Ash tree is a plant. A herbivore eats plants.
Some plants may benefit from a small amount of ash added to the soil. Ash is like antacid for plants, so do not add ash to plants that like acidic soil such as roses. A small amount of ash from the fireplace (wood burning only, no garbage ashes) can benefit some of the cheaper soils available for houseplants, the ash will add some potassium and reduce acidity.
Both flyash and bottom ash are waste created at coal fired power pants. Bottom ash has a larger particle size. The two materials can be used as fill, building mounds (for overpasses on highways), as an aggregate in concrete and in the mix for paving materials.
No. Ash would get into the soil and "choke" the plants. They may not be able to live with ash all around them. The pH of the soil would also be affected.
Yes
The excess heat produced at the collector base junction may even burn and destroy the transistor.This situation is called thermal runaway.
Cinder.