There is no known code for this, what you have to do is if you have one of the white topped remotes is the following.
Turn Converter on
Move selector to AV1 or AV2
Press and Hold Mute and Select for 5-7 Seconds, the led light over your AV selection will light up a few times
Press the following buttons "9911"
Press power
Keep pressing channel up until the box turns off
Press Select to lock in code
Try pressing power to see if it works
I know the code search works, but you won't have access to the menu, and I wouldn't mess with anything but the channel up and down or power, the rest of the buttons don't work, and one of them turns volume down, but there isn't a working volume up button.
I do know the Magnavox dtv convertors use the same codes as the TV's, so you can use the DirecTV.com remote program guide as well.
The following code is the most popular for your brand.
10054
Setup Instructions
use silvania code 2941 press set up then cbl\sat and 2941
The code to program a Magnavox TB110MW9 with a universal remote control can be found in the manual for the remote. Look in the manual for the Magnavox brand STB code, or use the Sylvania brand STB code.
sdsfd
Found a solution that works well... I picked up a Sony RM-VL600 universal remote with learning capability. With this unit, I've been able to program all the functions of the TB100MW9 DTV Converter box. I picked up this unit at Walmart for $25, but have seen it on Amazon for as little as $16. This remote is a vast improvement over the remote that comes with the Magnavox DTV converter, and was easy to program. Found another solution.... after tinkering with the Philips universal remote for an hour, i finally found a code that can control the magnavox converter. the code is 0759. the Philips remote i have is SRU3006/27 but it might work for any Philips universal remote. the remote itself cost me about 15 dollars. if you call Philips or magnavox they would say none of the remotes can operate the converter.they obviously didn't know their own product...
0581 worked for me.
Program URC-A6 remote
use magnavox code 1053
The codes relate to the tv set and not the remote. Google the set or sanyo and you will get the code. You then need a universal remote to programme to that code or the instructions for the Philips remote to see if that can be reprogrammed. Again Google Philips and the make.
Here are some codes I found online but none seem to work for my remote. Codes for Magnavox TV when using RCA Universal Remote: 006,007,010,011,013,016,027,033,035,043,066,087,089
I need the tv code using a Philips unversal remote for a sanyo tvwww.urc.Philips.com/Phillips official website...
2002 Worked Perfectly!
Your remote's model is actually PMDVD6. You should be able to get the manual for this remote from Philips' website.
Philips universal remote DVD code 0194.