15 ft. lbs. torque in specific sequel criss-cross careful not to over tighten cause it will squish the gasket and allow for leakage.
The 2001 Nissan valve cover bolt torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
17 ft./lbs.
90in-LBS. NOT FT. LBS.
17 ft./lbs.
Probably no more than 18 Flbs.
Check the specs for the vehicle you are working on (You can find them on the net if you do not have the manual) and the torque requirements will be there. Do not over torque the bolts as removing a broken valve cover bolt is a pain. Good luck.
Around 7 ft/lbs
Head bolts ------------------------------ 65 lb/ft Intake Manifold (Cast iron heads) -- 30 lb/ft Exhaust Manifold ----------------------- 25 lb/ft Valve Cover ------------------------------ 3 lb/ft
whats a head bolt torque of l300diesel2000
65 ft./lbs.
60 ft-lbs
Head Bolts-----------65 lb/ft Valve Cover-----------3 lb/ft Intake Manifold-----30 lb/ft Exhaust Manifold---25 lb/ft Spark Plugs----------20 lb/ft