polo mod 2009 hatcbace
its the engine control unit... it manages all the working of the motor
yes
You have to remove engine first. İts easier from under the car. Attach the engine and gearox eachother and lift them to the inside, but be carefull about location, otherwise axles are gonna break...
The idle speed on a VW Polo is regulated by a Idle air control valve. The valve is located in the engine bay and can be adjusted through to either increase and lower the idle speed.
indonesia
If the EPC light came on in a Polo and there is smoke coming out of the engine, there is a problem with an electrical circuit somewhere. EPC stands for Electronic Power Control. Perhaps an electronic sensor on the motor shorted out. It is also possible that the entire fuse panel inside the engine compartment has shorted out.
Marco polo
polo torque settings 1200 engine main bearing
On the 12 valve engine it is positioned underneath the inlet manifold at the gearbox end to replace I found it easier to remove the inlet manifold after wasting time trying to do it with the manifold in place.
the best for polo AHW is 5/30 full syntatic
Electronic Pedal Control
polo GTI