1000
what does cop 89 mark mean
The Stevens will accept whatever caliber designation is stamped on the side of the barrel.
Fabrique Nationale, or more commonly known as FN
50-175 usd
Yes. Some are stamped Stevens by Savage Arms Co.
Stevens had the "Favorite" line of .22 rifles.
what does u.s.pat.p on jewelry?
The "J.Stevens" name was shortened to "Stevens" in 1940. What you need to look for is the chamber size, which should be stamped on the barrel. It needs to be 2 & 3/4 inches to shoot modern ammo. Also Stevens usually stamped near the chamber size if the barrel was proof tested. My Stevens single is stamped "Proof Tested Steel" and it handles modern ammo well, but kicks like a mule. To be really safe, let a gunsmith look at it.
My sources tell me that production years are letter coded in the number letter combo stamped on the bottom of the reciever. Codes start with A = which equals 1949. I just picked one up stamped M and the listing said it was made in 1960. So I would guess that yours is circa 1959.
The "J.Stevens" name was shortened to "Stevens" in 1940. What you need to look for is the chamber size, which should be stamped on the barrel. It needs to be 2&3/4 inches to shoot modern ammo. Also Stevens usually stamped near the chamber size if the barrel was proof tested. My Stevens single is stamped "Proof Tested Steel" and it handles modern ammo well, but kicks like a mule. To be really safe, let a gunsmith look at it. "J. Stevens" was used from 1930 to 1948. Any gun built by Savage/Stevens in that time period will have chambers 2 3/4 or longer. If it also says "& Co" or "A & T" it will be older and may not.
The model number is stamped on the right side of the receiver on many Stevens products.