What is the air gap for a 1991 S10 truck type E engine ignition pick up?

nevermind....unless you want to post the actual answer for others to find...what we did was used a piece of paper in-between the metal (lips,forks...w/e you want to call them.) that pass between the magnet and the chip on the pick-up. and tightened it down once we had sufficent tightness on the paper. Allowing for just enough so we can slip the piece of paper out...for those that want to know what type of paper it was just ordinary printer paper....just cut a piece about a 1/2 inch wide by 10 inches long and feed one end through...then manualy turn the flywheel till the (forks....w/e) rotate inside to the center of the pick-up

First answer by Malikye Mirage. Last edit by Malikye Mirage. Contributor trust: 0 [recommend contributor]. Question popularity: 1 [recommend question].