front- 36mm
It is 46 lbf-ft.
101 ft/lbs
180 foot lbs
2000 f150 fron axle nut
In order to dissemble the rear axle on a 2000 Honda TRX 300 first determine if it is inner or outer joint. You then remove the retaining ring behind the boot to access the axle.
34mm</> It is right
Axle torque specs are as follows: Axle nut torque..............148Ftlbs
The torque for the rear axle nut on the 1996 Magna is 63 ft-lb. That's from the Honda Service manual. Hope this helps you out.
155 ft lbs
There are three weights used: GVWR and FRONT AXLE and REAR AXLE. For each vehicle this information is located by opening the driver's door and looking on the door jam (near latch) for the empty weight. My GVWR (Gross Vehicle Weight Rating) for my '87 Prelude is 3340 lbs. Front axle weight is higher than the rear axle due to the engine up front.
221
Front axle = 55 lbf-ft. Pinch bolts = 9 lbf-ft. Rear axle = 80 lbf-ft.