A new head gasket.
No, nothing will fix a blown head gasket except replacing it. Sealer are only used in an emergency situation as a temporary fix.
It really should be looked as a very temporary repair more of a get you home type of fix Best if a faulty head gasket is changed have the head skimmed and pressure tested whilst it is off best wishes
There is none. You cannot fix a blown head gasket with any head gasket sealer of any brand. They should only be used in an emergency situation in order to get the vehicle to a repair shop. The only permanent fix is to replace the head gasket.
A coolant additive that seals some external leaks and closes off internal coolant passageways including stopping flow in a radiator or heater core. There are different products for different applications. There is a radiator leak sealer which uses "organic material" to seal leaks, and a head gasket/block sealer that uses sodium silicate to solidify under high temperature.
It is most likely a blown head gasket or a cracked head. Chemical sealers generally do not work. Your best bet is to replace the head gasket and inspect the head for damage.
Not likely.... I'd never use anything "temporary" on a head gasket.
Gasket that goes between head and valve cover to prevent leaks
IMO, this is only a temporary emergency fix. It will not permanently fix the problem. You will need a new head gasket.
You possibly have a leak in the cylinder head gasket.You possibly have a leak in the head gasket.
A common cause of problems in cylinder head gaskets is leaks in the gasket. When a leak forms, the gasket must be replaced.
Replacing a head gasket on a 1996 Honda Accord requires removal of the cylinder head, timing belt, and several other components. The head will need to be resurfaced. Remove the old gasket and place the new one with gasket sealer. Reinstalled the head.
Most often that indicates the presence of water or coolant in the combustion chambers. Common causes are head gasket leaks, intake gasket leaks, warped head/s or warped intake.