It is the c-shaped port between your throttle body and air intake manifold. Remove the throttle body, buy some throttle body cleaner, and scrape it out (it is on the face of the a.i.manifold where the throttle body mounted). Make sure that a wire will pass between this area and the egr valve. If you've replaced your dpfe sensor and still haven't cleared the code to pass your emissions test, then this is 99% certain to be the problem. I have another post out there with the proceedure. I'd bet if you searched "p0401" you'll find it. I appologize for not posting the entire process again. it takes some explanation. mb
Machines with which cleaning can easily be done are called cleaning equipments.Such as vacuum cleaners,steam cleaners.
Yes. It can be steam cleaned.
They are self-cleaning.
Cleaner with function of water cleaning. It allows wet cleaning of your carped.
The planet Mercury has almost no atmosphere, it's essentially a vacuum.
vacuum is measured in pressure. To get a vacuum you need a negative pressure. that would be inches of mercury hg
If your cleaning the vacuum does that make you the vacuum cleaner?
Pressure is often measured in inches of mercury when describing barometric pressure in weather reports. This term is also known as "inches of mercury vacuum".
The commercial vacuum company Cleaning Technologies makes a truck mount carpet cleaning machine named the Excalibur. Steambrite manufacturing also makes truck mount carpet cleaning machines.
Depending on which part needs to be replaced on your Bissell Vacuum cleaner, it can cost from $2 to $100. You can get replacement parts for your vacuum on Bissell's website.
27
The doors are controlled by a vacuum hose. Chances are the vacuum hose cracked or broke due to age allowing a leak. replacement hose is available by the foot at any auto parts store, take in a piece to match the size of the hose.