It is my understanding that there are not national or international standards. The NEC does not dictate. In the mid-western United States, standard colors are brown, orange, yellow (b.o.y.), gray for neutral and of course green for ground.
In America 480 voltage colour code is brown, orange and yellow for L1, L2 and L3. Other three phase identification colours are black, red and blue.
In Canada all three phase voltages are designated red, black and blue.
Yellow is the color used for 2400 volt labels
brown,orange yellow, and gray for neutral
orange yellow brown
220 volts alternating current
Yes, 220 volts is in the same voltage classification as 230 volts.
No. It would have to be wired for 220 volts and would have to be rated for 220 volts and would have a different configuration so that a typical 120 v plug wouldn't fit the outlet.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
Use a step-up transformer from 110 volts to 220 volts. Try getting one at Home Depot or SEARS.
Two wires are needed for 220 volts.
If the Peak to neutral voltage is 220 volts, the root mean square voltage is 155.6 volts (sqrt(220)).
220 volts alternating current
Does this air conditioner require 220 volts?
220 volts, 110 volts, 440 volts, 400 volts, AC or DC voltage. High voltage like - 220 KV, 400 KV, etc
That is not a true statement
110 volts
Yes, 220 volts is in the same voltage classification as 230 volts.
A 220 volt line may put out 250 volts because this specification features voltage that varies between 220 and 250 volts. In other countries, the electricity varies in voltage between 110-120 volts.
You need a step-up transformer.
A three phase panel will not give you 110 and 220 volts. A three phase four wire panel will, but not at these voltages. The nearest voltages will be 120 and 208 volts. The 120 volt is the wye voltage of 208 volts. 208/1.73 = 120 volts. A single phase three wire panel will give you 110 and 220 volts.
No. It would have to be wired for 220 volts and would have to be rated for 220 volts and would have a different configuration so that a typical 120 v plug wouldn't fit the outlet.