0
By definition, the CFFF is "the highest or lowest temporal frequency, at a given percentage modulation, that can be resolved." (Schwartz, Visual Perception, 3rd ed.) In other words, the limits of distinguishing a flashing light from a steady one (at both the slow and fast end limits). Percentage modulation is calculated using the amplitude of the luminance of the light source, and the time-averaged luminance of said light source. In other words, the difference between the brightest/dimmest points in the cycle, averaged over the speed it takes to vary between the two points. Percentage modulation is used to calculate Relative Sensitivity, which is (1 / Percentage Modulation). For example: A lightbulb powered by Alternating Current (AC) is flickering. This is not visible to the normal human eye for two reasons (both variables in the definition of CFFF.) The temporal frequency of the AC in most American homes is 60Hz. The high temporal frequency cut-off for human sensitivity varies, and some cells are known to be sensitive to frequencies as high as 250 Hz, but for general daytime vision, it is lower than 60Hz. Also, the percentage modulation of a light bulb is low, since the change in brightness of the filament is very small. Relative sensitivity is the inverse of the percentage modulation. For flicker to be visible, a light source must have a relatively large change in level of brightness, and flicker at a rate within the human sensitivity range, somewhere between 2 and 50Hz. By definition, the CFFF is "the highest or lowest temporal frequency, at a given percentage modulation, that can be resolved." (Schwartz, Visual Perception, 3rd ed.) In other words, the limits of distinguishing a flashing light from a steady one (at both the slow and fast end limits). Percentage modulation is calculated using the amplitude of the luminance of the light source, and the time-averaged luminance of said light source. In other words, the difference between the brightest/dimmest points in the cycle, averaged over the speed it takes to vary between the two points. Percentage modulation is used to calculate Relative Sensitivity, which is (1 / Percentage Modulation). For example: A lightbulb powered by Alternating Current (AC) is flickering. This is not visible to the normal human eye for two reasons (both variables in the definition of CFFF.) The temporal frequency of the AC in most American homes is 60Hz. The high temporal frequency cut-off for human sensitivity varies, and some cells are known to be sensitive to frequencies as high as 250 Hz, but for general daytime vision, it is lower than 60Hz. Also, the percentage modulation of a light bulb is low, since the change in brightness of the filament is very small. Relative sensitivity is the inverse of the percentage modulation. For flicker to be visible, a light source must have a relatively large change in level of brightness, and flicker at a rate within the human sensitivity range, somewhere between 2 and 50Hz.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How does fusion frequency relate to tetanus?
The fusion frequency is the minimum stimulus required to elicit tetanus in a muscle. For example, the fusion frequency can be given in terms of volts (V), or it can be given in terms of whatever units by which the applied stimuli are being measured.
What is the critical temperature at which nuclear reactions begin?
For nuclear fission reactors there is no critical temperature, though they do have a temperature coefficient which makes the efficiency of the chain reaction vary slightly with temperature. This can be negative or positive, obvously a negative coefficient is preferred and is safer. Nuclear fusion is another matter, and very high temperatures are required in tokamaks to get fusion started
Can hydrogen oxygen in the water molecule break by applying the resonance high frequency?
This is generally referred to as Bubble fusion, or sonofusion. No repeatable and independently verified test has proved that this is possible and sustainable. ----
What is the definition of flicker?
To burn unsteadily or fitfully.
Fusion is a type of?
Fusion is a type of
What indicates strong mental health?
A quck test that differtiates those under great stress from more normal people is the CFF (critical frequency fusion).
How does fusion frequency relate to tetanus?
The fusion frequency is the minimum stimulus required to elicit tetanus in a muscle. For example, the fusion frequency can be given in terms of volts (V), or it can be given in terms of whatever units by which the applied stimuli are being measured.
What has the author Vernon Lemont Miller written?
Vernon Lemont Miller has written: 'The critical frequency limen for visual flicker in children between the ages of 6 and 18' -- subject(s): Left- and right-handedness, Physiological optics, Vision
For satellite communication the frequency should be less than critical frequency?
For satllite communication the frequency should not be less than the critical frequency because in satellite communicaton high frequency is needed which is reflected by satellite but not by the ionosphere.
What is the critical temperature the core must reach for a star to shine by fusion?
about 10500-11000k is when fusion commences which creates the shining of the star
The critical temperature the core must reach for a star to shine by fusion is?
About 10,000,000K.
Word in the solar system that starts with f?
flare, fusion, falling star, frequency
What is formula to find maximum usable frequency?
I suppose the formula is: MUF=critical frequency/cosine(angle of incidence). ex:The MUF for an angle of incidence of 60 deg and a critical frequency of 60MHz will be MUF=60 * 10^6/cos(60) =120 MHz By VSR
2005 silverado dash lights flicker?
why do my lights flicker and interior lights flicker
When was The Flicker created?
The Flicker was created in 1965.
What is second critical speed of turbine?
Critical speed means where natural frequency is equal to system frequency.
What are the critical parts in a transmitter?
The frequency control portions are most criticall. crystals were used to stabilize frequency and avoid problems with interference or ( harmonics) as it was called. Ham transmitters can be banned if they are off-frequency and produce audible harmonics which can interfere with TV reception. So- for legal reasons, the fine-tuning and Frequency control elements are critical, so are voice or code input jacks, amplifiers. and so on.
