I had a problem with a noisy hunter fan last month. After going to similar post like this one, I found this site www.fanshack.com and ordered a bottle of fan motor oil (I know it sounds funny) but it cleared it right up. I couldn't find this oil at lowes or Home Depot for the life of me. Anyways, try these people out they also helped me pickout a nice light kit for my fan too. Hope this helped.
AnswerIf it has a light, make sure the nut holding the diffuser holds it so that it won't rattle. AnswerMy Hunter ceiling fan developed a scratching sound after about 6 months of use. I checked all screws blades etc. Finally I removed the housing to expose the motor. It was then that I noticed a piece of mesh had become unglued and the rotors where rubbing against it. Problem solved. Answerglue pennies to the blades! If there is a imbalance in the fan this will clear it right up. that is until the pennies fly off and break stuff! Believe it or not, I actually saw a friend do this. AnswerIT ALL DEPENDS ON WHAT IS CAUSING THE NOISE. IF THE FAN IS OUT OF BALANCE GO TO YOUR NEAREST FAN DISTRIBUTER AND BUY A REAL BALANCING KIT AND FOLLOW THE DIRECTIONS.IF IT IS NOISE FROM THE MOTOR AND YOU ARE NOT A QUALIFIED ELECTRICIAN, YOU SHOULD CALL A PROFESSIONAL WHO CAN COME AND LISTEN TO THE FAN AND DETERMINE WHAT STEP TO TAKE NEXT. Answeryou may also want to check the light bulbs and other glass fixtures on the fan/lamp (if there are lights). Sometimes they aren't seated properly on the rubber seals or screws that hold them together and they rattle and make other noise. Answerthe above is GREAT advice- often it sounds like the motor, but it's just a light bulb rattling on the glass in the light kit, or a loose screw.Matt
AnswerAs Stated In The Ceiling Fans Manuals, Turn The Ceiling Fan Off For 24 HRS. Then Turn It On. If It Proceeds, Check All Screws. If It Proceeds, Check The Lights, If There Are Any. If It Proceeds, Check That The Pulls Are Not On The Lights, If There Are Any. If They Are, Remove Them. If It Proceeds, Remove The Ceiling Fan Itself, Replace It. Answerreplacement AnswerIn most cases when your ceiling fan makes noise, it's is off balanced.I have found this on http://www.ceiling-fan-wizard.com/noisy-ceiling-fan.HTML
This is usually due to the fan blades; and this is probably the easiest problem to fix once you find the blade that is off. It can also be a production fault, but this is exceptional.
Answer
My fan made a noise only when the switch was on. As soon as the switch was off the noise stopped, even though the fan still continued to turn. I tried reversing the direction, but still got exactly the same effect (switch off + fan turning = no noise; switch on + fan turning = noise). So I was sure it was an electrical problem.
But when I started to dismantle the fan, one out of the eight screws holding the blades was a little loose. Tightened screw, problem solved (and the night before we had almost bought a new fan!)
IF YOU RECENTLY CLEANED OR REMOVED BLADES FOR ANY REASON YOU LOST ONE OF THE WASHERS FOR A SCREW. THESE FANS ARE SO BALANCED THAT A 1/4OZ WASHER WILL THROW IT OFF. i CAN'T TELL YOU HOW MUCH MONET i MADE AS A HANDYMAN FIXING THIOS PROBLEM.
Ceiling fan motor is squeaking
you fix the light on the ceiling fan by puting a new light bulb in your fan
Be certain to observe the exact same polarity as the old one. A capacitor does have plus and minus leads. Should an old defective ceiling fan transformer be replaced by a capacitor?
Try moving the tube in the fittings, if this doesnt work, then you probably need a new starter motor.
You may have a bad switch with contacts that are very close together, which may inadvertently touch each other, closing the circuit and turning the fan on. Calling an electrician may be in order. He or she will be able to trouble shoot the exact cause and fix it safely.
There is a fault with your electrics to the fan/switch. Get in an electrician to fix it. ------------------------------------------------------------ The switch is bad. Turn off the power to the fan in the main panel, turn off the breaker that powers the fan. Usually if you remove the bottom cover of the fan you can see the switch. You can remove the switch and take it to a electrical supply store and they will match the switch. The wires should all be color coded so you should be able to put in back in and hook it up. Black to black, white to white.
you fix the light on the ceiling fan by puting a new light bulb in your fan
1) clean the ball-bearings 2) change the capacitor 3) clean the blades 4) lubricate the ball-bearings that will do the job, if not then there is problem with the motor.
Your ac/heater blower motor may be going out, located below the glove box compartment.See "Related Questions" below for more about this easy do-it-yourself repair.
remove the motor, some times its a buildup of leaves or debris stuck in the (squirrel cage fan blade) if no debris motor is old and bearing is worn you can run the blower while it it out of heater box but hold on with 2 hands and have someone turn switch you dont want to break plastic fan blade cage by bumping into dashboard at 600 rpm
The fan motor itself is not serviceable. The fuse, relay, and sensor could be bad causing the fan not to run. Check these before changing the motor.
Be certain to observe the exact same polarity as the old one. A capacitor does have plus and minus leads. Should an old defective ceiling fan transformer be replaced by a capacitor?
You will have to replace it. The bearings are worn out in the blower motor.
Use a test light connected to the fan motor - if it lights fan motor is bad if it does not light could be fuse, relay, switch, or resistor
If you are looking for ceiling fan parts, you have several choices. You should try Lowes or Home Depot, they will have any part you would need. You can also contact the company that makes the fan and they can get you parts and information.
A ceiling fan wobbles if it is unbalanced. You can fix it by taping or gluing a small weight to the blade opposite to the one that appears to be the lowest as it is spinning.
Nope, time to get a new one.
Most likely it is a fan motor that is pulling too much amperage. I'd start with the fan motor and/or the fan motor resistor.