ABS's density is 1.04 grams per cubic centimeter or 0.0376 pounds per cubic inch. Even though it's denser than water, it is strongly hydrophobic so small pieces can "float" due to surface tension.
Source: http://www.sselec.com/data/ins%20specs/ABS%20Data%20sheet.pdf
Air at 10 celsius and 1 bar(absolute) has density 1.25 kg/m3. By 6 bar do you mean gauge or absolute pressure? To apply a pressure factor you must use absolute, ie the pressure above a vacuum. Normal atmospheric conditions are 1 bar (abs). If you mean 6 bar(abs) the density becomes 6 x 1.25 = 7.5 kg/m3. On the other hand if you mean 6 bar (gauge) this is 7 bar (abs) and the density would be 7 x 1.25 =8.75 kg/m3. Either way, you just divide the weight of air in kg by the density to get the volume.
Its density. Density is mass per unit volume.
This is the determination of the specific density (the ratio liquid density/water density).
what is the density of acrylic? what is the density of acrylic?
Certain companies do make ABS roof truss . Abs is also plastics
The Density of PC+ABS is 1.1 g/cc
Air at 10 celsius and 1 bar(absolute) has density 1.25 kg/m3. By 6 bar do you mean gauge or absolute pressure? To apply a pressure factor you must use absolute, ie the pressure above a vacuum. Normal atmospheric conditions are 1 bar (abs). If you mean 6 bar(abs) the density becomes 6 x 1.25 = 7.5 kg/m3. On the other hand if you mean 6 bar (gauge) this is 7 bar (abs) and the density would be 7 x 1.25 =8.75 kg/m3. Either way, you just divide the weight of air in kg by the density to get the volume.
Yes James Maslow has abs, in fact you have abs and I have abs, we all have abs.
0.0376 lb/in³ 1 lb = ~26.6 in³ (approx dimensions: 2.98" x 2.98" x 2.98")
does it have abs
The ABS light will remain on and the ABS will not function.
It will bolt in but the abs light will illuminate and the abs will not function.
The ABS light is on because there is a problem with the ABS. The light won't go out until the problem is fixed. As long as the ABS light is on the ABS will not function.
The ABS light is on because the ABS module detects a problem with the ABS system. Until the problem is fixed the ABS function will not operate and the light will remain on.
Every time you start and drive the vehicle the abs self tests itself. If there was a problem with the abs, the abs light would stay on until it is fixed. Also when the abs light stays on the abs system will not function.
Jessica Alba has toned abs. Justin timberlake has ripped abs. Ripped abs are stronger than toned abs. So Justin Timberlake's abs are stronger, sexier, and look better than jessica Alba's abs.
thermoplatstic