when ever an interrupt occurs, it saves the context of the program being executed & sets the PC to the starting address of the interrupt handling program. now after servicing the interrupt if the same process is resumed which was being interrupted then we will say a context switch has occurred.
But imagine after servicing the interrupt if a new process is to be executed then some more work is required, that is it has to save some more information from the PCB to keep reference to resume its execution and we say process switch has occurred..!!
In an electronic switch there are no mechanical/moving parts - the switching action is achieved entirely within the electronic components. Electronic relays are generally a mechanical switch controlled by electronics.
6 volts
If the switch, light bulb, and source are all connected in series and the switch is ideal (has no resistance), then the switch acts as a short. There is no potential difference across the short.
A limit switch turns on or off when the object being sensed reaches a specific location.A proximity sensor returns an analog signal indicating how far the object is from the sensor.
Transistor is an tiny electronic device called electronic switch,which is building block of a processor. Processor is a data processing device consists of thousands or millions of transistors. Eg- Intel 8086 microprocessor has around 29000 transistors.
Process switch is switch the process state between the status like read, blocked ,suspend. Mode switch is the switch the process privilege between the mode like use mode, kernel mode. Generally a mode switch is considered less expensive compared to a process switch.
When a context switch occurs, the kernel saves the context of the old process into its Program Control Block and loads the saved context of the new process scheduled to run.
Scheduling has to do with how the job scheduler decides which task will have the CPU and for how long. This is the technique of multi-tasking; the appearance of running multiple processes at the same time (when they really aren't). Context switching occurs when a process needs to do something in a privileged way, such as requiring communication with another hardware device. When the process is typically running it is in user mode, which is a non-privileged mode of operation. It has to context switch into kernel (privileged) mode to do things, then switch back. The main difference between the two is that context switches happen in a non-predictive manner in the same program/process, and job scheduling is predictable (to a point). Then again, they serve different needs of the Operating System, as well.
Context switching allows for a computer to multitask. It can suspend one process in order to switch over and run another process. The first process can be brought back up by suspending the second one.
Context means ,in terms of computers, the status of various general purpose registers having some process specific data values and even some other structures dependent on computer hardware,i.e. PCB etc. Now what context switch means ,""switching from one status of registers set to another status of registers set."" This context may be of a process or thread etc. Now when we are talking about any type of context switching,,it means we are requesting the KERNEL to save the current context anywhere,and fetch the next context for us.. It requires a mode switch between user mode to kernel mode, so that required switching may be performed in right order.... Isn't it simple ,,or what.
no difference whatsoever
If the process that gets the control can be put into the register (its kept in cache though) means less time to fetch and have a context switch. Any way the context switching time isn't a big time delay.
go to www.howstuffworks.com
What_is_the_difference_between_proxy_switch_sensor
they're not totally indistinguishable, they overlap as one is needed for the other. context switching is the process of storing and restoring the state of a process. when a interrupt handler interrupts a program, the context switch is enacted. the current programs status is saved and then once the program interrupt is finished, then program interupted is restored. the program interrupting is the computers way of responding to outside stimuli. in simple terms it saves the programs status, deals with what ever the interrupt is, then restores the programs status (what ever said program happens to be).
Both are same...
Technology wise there is no such difference.