Modulation is the way a source of information transmits that information through a carrier.
For example, look at human speech. A person, the source of information, transmits data by modulating the air with sound waves in a way that is understandable to other humans. In this case the air is the carrier.
Multiplexing is when many slower data lines (CAT5, POTS, etc.) are combined into a single faster data line (T1, Optical Fiber). An example is the communications backbone between two cities. A fast, high bandwidth optical line joins the cities together, but when it reaches either city's limits, it is split up into many individual phone or data circuits.
The bottom line is that modulation is how a source manipulates the carrier where as multiplexing is combining multiple circuits into a single, faster line and then separating them again.
Modulation refers to the change in the carrier signals parameters corresponding to the modulating signal. Multiplexing is to utilize the bandwidth. Multiplexing is said to be done when a number of data line are combined to a single and faster data line.
What is the relationship between multiplexing & modulation
iyihijo
djhdasbcamMJHSJC K
application of multiplexing in data communication
micxingthe between the phasr and frepaancy shift keying
angle modulation is called non linear modulation because the information is stored in phase of the carrier signal
A multiplexor is a device that takes two or more signals and encodes them on fewer (often, on one) wire. A demultiplexor is a device that reverse that process.
FM means Frequency Modulated.FM stands for modulation on frequency or frequency modulation.
fc>2fm
modulation means transmitting the signal which is to be transmitted along with the carrier wave, then at the receiver it is separated from the carrier and demodulated. So modulation is needed so as to transmit the signal over long distances with higher accuracy. Hence it is required before multiplexing.
Gordon Drury has written: 'Coding and modulation for digital television' -- subject(s): Digital modulation, Multiplexing, Digital television, Coding theory
In cable TV, we use frequency multiplexing but in DTH, we use PCM along with quantization.
Split up among several closely spaced subcarriers.
The two terms, modulation and intonation, are related as they are both terms that describe voice and harmony. Modulation is related to inflection, in which the voice changes in pitch or tone. Intonation, on the other hand, is the relationship between the pitch of musical tones and their keys or harmony.
The difference between frequency modulation and phase modulation is that with frequency modulation the angular frequency of the signal is modified while with the phase modulation, the phase angle of the signal is modified.
The difference between pulse code modulation and delta modulation is that pulse code modulation is a method of encoding audio information digitally while delta modulation is a method that converts analog to digital signal.
A terminal may transmit several application, at a time. All such data of that terminal is multiplexed, and this multiplexed signal is modulated onto a carrier.
There is no difference.
Currently the mobiles use GSM(Geo Synchronous Mobiles ) and CDMA(Code Division Multiple Accesss) techniques. GSM inturn uses TDMA(Time Division Multiplexing) or FDMA(Frequency Division Multiplexing) or sometimes both to fit in the required criteria.
Multiplexing-Combining all the inputs into one output. Switching-Taking one input to the output, at a time/frequency