0
What is the difference between thin set mortar and sanded grout?
Wiki User
∙ 14y ago
Thinset is a type of blended portland cement used to set tile on a slab or cementboard.
the tern "thin" is from the thin bed that the tile is set in. thinset mortar is a blend of portland cement, finely graded sand and a water retention compound that allows the cement to hydrate.
there are many different types of thinset out there in grey and white color, multi purpose, polymer modified, non-modified, fast Setting or high quality latex modified thinset mortars like flex, super flex and multi flex thinset.
Grout is used to fill the joint in between the tile.
there are a few types of grout out there....... * Portland cement based grouts * epoxy-based grouts * furan resin grouts The portland cement based is the most popular. and is made up of graded sand, portland cement, sometimes water retentive additives, and colored pigments.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the difference between sanded and non-sanded grout?
The obvious answer is sanded grout has sand. But the in depth answer has many differences. Sanded grout which is the most common, can be used in a grout joint from 1/8" to 1/2" (and larger but check the grout). Sanded grout scratches many tile like glass. Non sanded grout can only be used on joints 1/8" or less. Non sanded grout is typically seen on marble and granite tile, many wall tile, and all glass tile.
What is the difference between cement and grout?
Grout is a substance that is used to fill gaps between tiles, such as in a shower or bathroom. Grout may be made of small aggregate, sand, and Portland cement. It may also be made of Portland cement or masonry cement and sand. There are many different types of cement, and these are usually used as an ingredient with which to make concrete and mortar.
Is concrete grout and mortar the same?
Concrete generally has larger aggregate than mortar.
Can you use unsanded grout for a tile floor?
Yes, you can use unsanded grout for floor tile but you'd only want to use it if the grout lines were 1/8" wide or less - like for granite or marble tiles.If using those, be sure you have a pefectly flat surface.ANSWER:You never want to use sanded grout with marble. If the marble has to be restored or re-polished for any reason the sand in the grout with act like sandpaper on the stone.
What is grout used for?
Grout is a construction material used to embed rebars in masonry walls, connect sections of pre-cast concrete, fill voids, and seal joints (like those between tiles). Grout is generally composed of a mixture of water, cement, sand and sometimes fine gravel (if it is being used to fill the cores of cement blocks). Sometimes color tint is applied as a thick liquid and hardens over time, much like mortar.
What is the difference between sanded and non-sanded grout?
The obvious answer is sanded grout has sand. But the in depth answer has many differences. Sanded grout which is the most common, can be used in a grout joint from 1/8" to 1/2" (and larger but check the grout). Sanded grout scratches many tile like glass. Non sanded grout can only be used on joints 1/8" or less. Non sanded grout is typically seen on marble and granite tile, many wall tile, and all glass tile.
What is the white powdery substance between the ceramic tile on your floors?
Sanded Grout
Will using both sanded and unsanded grout on your back splash look okay if you have both 1-16 in and 1-2 in gaps to grout?
You should use the grout that will work best for the biggest grout space that you need. So for a grout width like you described, 1/16 to 1/2, you should use sanded grout. Unsanded grout will look terrible in a 1/2" grout joint, but sanded grout will look great in both. Use sanded.
Is there any difference between white tile mortar and gray tile mortar?
White mortar is the same as gray except it has been bleached. White thinset is needed if you are using a light tile with light grout.
What type of grout for bathroom tiles?
if your grout line is less than 1/4" you use smooth grout, above that you use sanded grout.
What grout is used for floor tile?
Most often, sanded grout is used for floor tiles because the grout lines are usually greater than 1/8" wide. Sanded grout is necessary for the wider lines to give added strength, and to keep your grout from cracking and chipping out. Unsanded grout must be used if your grout lines are narrower than 1/8", because the grains of sand in sanded grout could cause air pockets and prevent good adhesion to your tiles - and it will crack and chip out as well. Sanded and unsanded grouts are cement-based. One alternative grout on the market is epoxy-based. It is neither sanded nor unsanded, but will work fine in either narrow or wider grout lines. If your grout lines are wider than 1/2", or if you are using saltillo tiles, you must use saltillo grout. Other grouts will not handle this wider width.
What happens if you make a mistake and use non sanded grout in a ceramic tile joint of one quarter inch?
Non Sanded grout can be used in any size grout joint but is ideal in smaller joints usually up to 1/4" The main draw back to using unsanded grout in larger joints is that it may crack over time. If you are unwilling to remove all the grout and use a sanded grout, it is best to make sure the grout is cured and sealed properly to limit and minimize cracking.
How many cups in one pound of non sanded grout?
9
What is the difference between cement and grout?
Grout is a substance that is used to fill gaps between tiles, such as in a shower or bathroom. Grout may be made of small aggregate, sand, and Portland cement. It may also be made of Portland cement or masonry cement and sand. There are many different types of cement, and these are usually used as an ingredient with which to make concrete and mortar.
Is concrete grout and mortar the same?
Concrete generally has larger aggregate than mortar.
How do you make chalkboard paint?
Chalkboard paint is fairly easy to make. It takes 1 part non sanded grout to 8 parts paint. Non sanded grout is available at any home improvement store.
What kind of grout to use when tiling bathroom?
Since there are many features of grout, this will depend on your question. There are epoxy grouts and latex modified grout. Epoxy grout is very stain resistance. The problem lies in that epoxy grouts are hard for a novice to use. Latex modified thin-sets are durable when used correctly. Additionally, you need to make sure you buy sanded or non sanded grout depending on the size of the grout joint and type of tile. If you have many natural stones, glass tile, or a tile with a great deal of shine, you will need a non sanded grout. Many bathrooms need this regardless, because their grout joint is 1/8" or less. All joints larger than 1/8" require sanded grout. This means you must be cautious before you begin, you place your joints correctly for the style tile you have.
