Scintillation is a fluctuation in the amplitude of a target on a radar display. It is closely related to target glint, or wander, an apparent displacement of the target from its mean position. This effect can be caused by a shift of the effective reflection point on the target, but has other causes as well. The fluctuations can be slow (scan-to-scan) or rapid (pulse-to-pulse).
It appears especially at seaside level.
Scintillation and glint are actually two manifestations of the same phenomenon and are most properly linked to one another in target modeling.
hyperpure germanium detector:A variant of the lithium-drifted germanium crystal which uses high-purity germanium, making it possible to store the detector at room temperature rather than liquid nitrogen temperature.Read more: hyperpure-germanium-detector
Germanium fluorides are: GeF2 and GeF4.
Germanium diodes are more expensive than silicon ones, germanium is harder to process, germanium cannot be used to make integrated circuits (while early prototype integrated circuits were germanium the wiring between the integrated components cannot be integrated making it too expensive for production), germanium cannot operate with a junction temperature above 60C (silicon will operate up to 150C), and its reverse leakage current is greater. However! Germanium diodes have a lower forward voltage drop than silicon ones do, so they're better for some applications, like radio frequency detection.
The detector refers to the component that actually does the detecting. The monitor is the detector plus all the other stuff that comes with it that lets people monitor the levels of radiation.
Its the ratio between laser deflection amplitude at detector to vibration of cantilever. Shamial
Infrared detectors work on the principle of heat.The detector aims multiple beams of infrared waves or "curtains" into the detection path.The detector is looking for the difference in temperature between each "curtain". If there is no body heat present, all "curtains" will have the same temperature. If the difference exceeds a predetermined threshhold, a circuit is tripped.
difference between detector and diode
5M Detector to Detector
metal detector is sensor
hi, could any one answer what is the difference between hplc uv detector and spectrophotometer uv detector ? my id is debendra_mallick2002@yahoomail.com
Germanium is a good conductor because it is between silicon and tin, its a metalloid. Tin can conduct electricity and so can germanium
What the difference between envelop and coherent detection of AM signals
technical difference is flow cell is placed in between lamp and optics but in uv it is placed after grating. and flow cell receives monochromatic light in uv detector but polychromatic in pda.
The wavelength of the detected signal.
The main difference between the solar cell and detector is that the cell stores the energy, while the detector directs the energy towards the cell.
A charge detector is a type of device that is used to calculate the total charge or force between two different objects. This device is used by electrical engineers as a form of protection against electrocution.
Germanium fluorides are: GeF2 and GeF4.
dative bond