There is a 5 step process in the manual for the 99 Taurus cylinder head torque. Please note these engines use "Torque-To-Yield" head bolts! These are special bolts which stretch differently then conventional bolts! YOU MUST USE NEW HEAD BOLTS EVERY TIME THEY ARE REMOVED! NOTE: This is the procedure for 99 Taurus only! The 96-98 is different, and the 2000 is also different: 99 head torque: Step 1: 35 to 39 ft lbs. Step 2: Loosen 360 degrees Step 3: 22 to 24 ft lbs Step 4: Tighten 85 to 90 DEGREES (1/4 turn) Step 5: Tighten 85 to 90 DEGREES (1/4 turn) Done. NOTE: 96-98 uses 52 to 66 in step 1, step 2 same, step 3 is 34 to 40, and step 4 is 63 to 73. No step 5 - done. 2000 cars: Step 1 is 37, step 2 same, step 3 is 22 lbs, step 4 and 5 are same. Done.
The 1997 Mercury Cougar 4.6 liter engine intake manifold torque sequence should begin at each end of the manifold. Keep moving towards the center and alternating from and to end.
For a 1995 Ford Taurus 3.0 (except SHO), the torque specs are: 1st: 59 ft lbs 2nd: Loosen all bolts one full turn 3rd: 37 ft lbs 4th: 68 ft lbs The tightening sequence is: 6 - 4 - 2 - 8 5 - 1 - 3 - 7
torque for 97 taurus head
Torque sequence of what. Heads, wheels, etc.
torque sequence on what part? more info needed
Torque sequence------------ l 93157 l l 862410 l ------------ Step 1: torque in sequence to 44 Ft/LBS Step 2: in sequence completely loosen all bolts Step : retorque all bolts in sequence to 44 Ft/LBS Step 4: in sequence turn an additional 90 degrees Step 5: in sequence turn an additional 90 degrees Recheck final torque in sequence***CAUTION*** engine uses Torque To yield head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque.
what is the head torque sequence for a 1991 pathfinder
There is no torque sequence just torque rocker arm studs to the proper torque
what are the torque specs and sequence for a 1992 Nissan maxima manifold
140lbs on your torque wrench
i need the torque sequence for a 1998 pontiac grand am 2.4 quad
torque for bolts upper intake 1999 ford taurus 3.0 dohc