0
Get a Haynes Manual, A Chilton Manual. You can get them at Autozone, Advance Auto, or Napa. They Run under $20. And they are very helpful.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Cylinder head bolt tightening sequence Toyota tercel 1.5?
head bolt sequence Toyota tercel
Cylinder head tightening sequence 1990 Toyota Cressida?
Pls let me know the cylinder head bolt tightening sequence for toyota cressida mx83
Honda d15b2 head Tightening Sequence?
The Honda had bolt tightening sequence begins with the head bolts on each end of the head. Tighten the head bolts moving to the center, alternating from and to end.
Chevy 3.4 head bolt loosening sequence?
No such thing, just remove them. However there is a sequence to tightening them.
Cylinder head tightening sequence for Vauxhall Vectra?
The cylinder had bolt tightening sequence should begin by tightening the head bolts on each end of the head. Tighten the center head bolts. Work towards each end of the head, alternating back and forth.
What is fiat punto head bolt tightening sequence and torque?
It is important to know the head bolt tightening sequence and the torque of a vehicle. For the Fiat Punto it is 20nm, 30nm, 90 degree turn, 90 degree turn, then in order 8,6,2,5,10,7,3,1,4,9.
Head bolt tightening sequence for Mazda e2000?
Begin by tightening the head bolts on each corner of the head. Next, tighten the center head bolts. Tighten the bolts on each end of the head and move towards the center.
Head bolt tightning sequence?
There will be a diagram of this in every car's manual. -Follow that specific diagram to order of tightening and torque specs.
Daewoo leganza head bolt torque tightening pattern?
I need a picture of a leganza deawoo head bolt tightening patern
What is the bolt pattern on a 2001 Pontiac Sunfire?
which one? The head bolts? Engine to transaxle? And, are you really asking what the tightening sequence and/or torque rating is?
What is the torque spec for 1995 dodge spirit cylinder head bolts and what is the sequence of bolt tightening?
45,65,65 ft lbs then 90 degrees.
What is the 4G13 P SOHC cylinder head bolt torque specs?
Tighten the bolt in the sequence until each is torqued to 49 Nm, then completely loosen all the bolt then re-tighten them in sequence once again until each torqued 20 Nm. tighten each bolt again by 90 degree in accordance with the tightening sequence. After that tighten each bolt again by 90 degree in accordance with the tightening sequence. Some mechanics will refer this method as "20+90deg+90deg"
