i heard the engine dispacement on the 610 it's 60 cc's so horse power will be 6.2 hp, wich its pretty good
If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.
50:1 is incorrect. That mixture will not allow enough compression and the unit will be very hard to start, if at all. That mixture works well for Sthil products. If using an oil other than McCulloch, the ratio is 40:1. Brand specific McCulloch two cycle oil is 20:1.
82cc
need a diagram for mcculloch eager beaver chain saw
5.0 cc
A timber bear is 55cc. http://store.chainsawr.com/
Look for the bolts
If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.
any quality bar oil will work fine.
If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.
92cc 7hp
McCulloch chainsaw blades or chains come in 2 size with a variety of link lengths. The two sizes are 0.325" and 3/8", and both of these come in lengths between 30 cm to 50 cm, and can fit a variety of chainsaws.