Want this question answered?
Self GMD, or self-generated master data, is used to maintain and update master data records within an organization without relying on external sources. It helps to ensure the accuracy and integrity of the data by allowing internal departments or individuals to make direct updates to the master data.
Actually in networks we will consider the elements like resistance, inductance, capacitance as lumped elements for simplicity, like this in power systems we will consider the transmission line parameters(resistance, inductance, capacitance) as lumped elements, because we will calculate all the parameters of power systems with respect to receiving end or sending end but not with respect to middle of the line. If a fault occurs on transmission line then we should not consider the lumped elements of that total transmission line, we should consider the lumped elements from sending end to the point where the fault is occurred.
Capacitors can be used to decrease the inductance of power lines (series compensation), and for voltage support (capacitors are put in parallel with the system).
= Zo = sqrt(L/C) = sqrt(0.294e-3/60e-12) ~ 2214 ohms =
Conductance is ignored in short circuit studies because the inductance of the line is the dominant value. Conductance may not be ignored in stability studies.
Transmission Line Charging To initially charge the transmission line, the generator voltage stably controlled from 30% of the rated voltage to 110% of the rated voltage by using AVR. The change-over switch (43CH) for initial transmission line charging is mounted on the operator's desk in the main control room.This Voltage Changes are required because of the Stray capacitance effect at the charging and boosts the Voltage at the other end and the inductance of the line drops the Voltage soon after charging
The phase shift is caused by inductance in the transformer. Any inductance from magnetic flux that fails to link both windings is called leakage flux, and the resulting inductance is called leakage inductance.
By increasing Vr,Reducing in series inductance,increase capacitance
In addition to the number if turns, the inductance also depends on the length and diameter of the winding, the pitch (number of turns per inch), and the material of the core if there is one. Search on line and find an empirical formula for the inductance of a finite coil, and then work to tweak the other parameters to alter the inductance as required.
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
Type your answer here... By use an inductance meter or an inductance bridge
It is used to measure the inductance of a coil of unknown inductance.