Speed control of any kind of motor is important because it enable the user of the motor to restrain the motor speed to the needed or required speed to accomplish a specific task. omatycoon@gmail.com
The slip is not something that is used to control the speed, it is just the amount by which the motor is running more slowly than the synchronous speed. With a heavier mechanical load on the shaft, the motor runs slightly slower, so the slip increases and the motor draws more current and power from the supply.
Slip is defined by 1-N/N0 where N is the actual speed and N0 is the synchronous speed, and the effective resistance presented to the flow of current is R/s, where R is the resistance of the stator.
It is used for sensorless motor control. With vf speed control u can control speed of any induction motor.
To calculate the speed of an induction motor use the following formula, RPM = Hz x 60 x 2/motor # of poles. To answer the question, most of the motors must have 4 poles.
One way is to add a capacitor and some extra field windings. Starters are needed because the starting current in an motor may go as high as 6-7 times its rated current. Some of the methods used for starting motors are, Direct online starters, Auto transformers, Soft Starters, Variable Speed Drives, Intelligent Motor Controls.
induction motors have very little starting torque as the motor come up to speed it reduces the torque load until it gets near synchronous speed
This type of compressor uses a special drive to control The speed of the unit. Also, saves more energy than a fixed speed equivalent.
because dc motor is a powerful & dangerous motor it is akiller
Jussi Huppunen has written: 'High-speed solid-rotor induction machine' -- subject(s): Electric motors, Induction, Induction Electric motors, Mathematical models
Eric Roberts Laithwaite has written: 'Linear electric motors' -- subject(s): Electric motors, Induction, Induction Electric motors 'Electrical variable-speed drives'
The flux control method is the convectional and the non-convectional method of speed control of an induction motor.
It is used for sensorless motor control. With vf speed control u can control speed of any induction motor.
It is used for sensorless motor control. With vf speed control u can control speed of any induction motor.
John Michael Dorsey has written: 'An analytical and experimental investigation into application of a polyphase transistor switching circuit for speed control of induction motors'
They control the speed of motors.
To calculate the speed of an induction motor use the following formula, RPM = Hz x 60 x 2/motor # of poles. To answer the question, most of the motors must have 4 poles.
E. R. Laithwaite has written: 'A history of linear electric motors' -- subject(s): Electric motors, Linear, History, Linear Electric motors 'An inventor in the Garden of Eden' -- subject(s): Biography, Inventors 'Induction machines for special purposes' -- subject(s): Electric motors, Induction, Induction Electric motors 'Shape, the purpose of forms' -- subject(s): Geometry, Science, Shape, Juvenile literature 'The linear motor and its application to tracked hovercraft' -- subject(s): Electric motors, Linear, Electric railway motors, High speed ground transportation, Linear Electric motors 'Engineer through the looking-glass' -- subject(s): Engineering 'Propulsion without wheels' -- subject(s): Electric motors, Induction, Electric propulsion, Induction Electric motors 'All things are possible'
Synchronous motors run at synchronous speed. An induction motor that has the same number of poles must run at a sub-synchronous speed to create a second magnetic field (a field that is at a different phase angle) to generate torque.
How many methods can be used to control the speed of Single Phase Induction Motor? 1.injecting emf method 2.by frequency control method 3.induced voltage method