it depends upon spacing, grade of lumber and what the "load" above would be as well as use of the room, generally speaking though a #2- 2 x 8 :
@ 12"o.c.- 13'11"
@ 16"o.c.- 12'7"
@ 24"0.c.- 11'0"
He was 6 feet 1 inch tall. he actually told this in his Title song "Love Man" Doug Nelson, Virginia Beach Virginia
If the plastic post/window frame covers are felxible enough - or if there is a rubber trim piece, you can use a thin piece of plastic to pry the edge up and another thin piece to tuck the wire underneath, going just a inch or so at a time. Do not use a screwdriver or metal object like a scraper.
on the psgr firewall, usually behind dust or heat shield
A 1x4 inch piece of pine wood costs about .58 cents per foot. This means 12 feet of 1x4 would cost someone about $6.96 cents plus taxes.
answer: he digs 960.17 inch!
It is easy to put a 2-inch long piece of conduit that is less than half an inch in any cross-sectional measure into a half-inch conduit.
1/8th per inch
6 x (thickness of the piece) x (value of one cubic inch of amber)
You will get 36 pieces.
26 inch......means 650 mm
It depends on the length and width of the plate, and the thickness. A 12 x 12 inch piece of plate aluminum which is 1/2 inch thick has the same length and width as a 12 x 12 inch piece which is 1/4 inch thick, but the 1/2 inch piece will weigh twice as much.
Eight of them with some left over
Ginger (Fresh) 1 tablespoon, grated or chopped equals a 1-inch piece
You need to cut a 9 foot piece of plywood into 12 inch sections. Every cut also removes 1/8 inch. How many 12 inch sections can you get out of the 9 foot piece of plywood?
its 12 inches
a piece of chalk
3.