I don't really measure the minimum thickness of every cars' or truck pads..... we can see thru looking in between the rims w/ flashlight. Sometimes the outer pads gets more easier to worn out or get thinner or vice versa. I usually advice my clients to get rid of it. Better than forgetting it and can cost you a lot by changing every rotors. But to tell you the truth, I changed the pads at its 1/8 of an inch.
min rotor spec is 26.0mm
It is the safe and legal minimum thickness allowed for a brake rotor.
The 2001 Pontiac Grand Am minimum brake rotor thickness is .075. The minimum brake rotor thickness is a standard minimum. Certified mechanics cannot use the brake rotor when the thickness drops below this level.
Push the brake pedal to released.
Brake fluid in a Toyota Sequoia could be leaking from several places. Check the wheel cylinders first as they are a common place to leak.
2004 ford explorer minimum rotor thickness
The minimum rear brake rotor thickness on a 1996 Lexus LS400 is 15mm.
The minimum front brake rotor thickness is three aids of an inch. When the rotor does not have the minimum thickness the auto mechanic replacing the brakes can not use the rotor.
The minimum disc brake rotor thickness specifications for the 2006 Lexus GS are:Front: 27mmRear: 16.5mm
The minimum thickness number should be cast into the rotor.
It depends if 4 WD or just FWD and what year model Generally: FRONT: Brake pad minimum thickness 3.0 mm (0.118 inch) Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 inch) Brake disc minimum thickness (disc-drum system) 22 mm (0.866 inch) Brake disc minimum thickness (4-wheel disc brake system) 24 mm (0.944 inch) REAR: Brake Pad Brake pad minimum thickness 3.0 mm (0.118 inch) Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 inch) Brake Disc Brake disc minimum thickness 11.0 mm (0.433 inch)
The minimum brake rotor thickness for a 2002 Mitsubishi Eclipse is 1.17 inches. When it falls below this thickness, braking performance will suffer and must be replaced.