That would be called Ribbon Cable. It's generally used in connecting hardware, such as: CD Drives, Floppy Disc Drives, and Hard Drives. The best thing to do is search for 'PS3 Ribbon Cable' and then make sure the Ribbon Cable has the correct amount of slots at each connection of the Ribbon Cable.
mother is the main circuit board of the computer on which all the hardware devices are connected to the supply while circuit board is the circuit which a particular device use and is connected to motherboard
hardware
hub or webramp
it means that it's star connected on the motor part
run in a electrical system means a wiring & conduit runs coming from Panel Board Circuit Breaker to its branch circuit loads in a circuit. while circuit is a designated number of branch breaker in a panel board where power load was individual connected.
A line. This represents either wire, solder or foil run on a circuit board. These can end and have a page or other notation meaning it is continued elsewhere on the page or on another page.
a video card
that is the main circuit board inside a computer. Every other component is connected to the motherboard in order to work.
Supplies current for guages etc. It is just a replacement for wiring in confined spaces.
Yes, when equipped with a TV adapter, which is commonly a circuit board inserted into extension slot of the mainboard.
The main circuit board of the computer is the motherboard.
A printed circuit board is just a thin piece of board that allows electronics component to be connected to each other. It uses conductive pathway to track, or to signal trace etched from copper sheets laminated on to a non-conductive substrate. The circuit wire are clearly built on the board. The PCB can also referred to as printed wiring board or etched wiring board. As clearly the answer to this question is: A printed circuit is just a printed wiring board,is just a piece of board, it is pure; there are no electronic component are placed on the board yet. A mother board is a board which all electronics component are built on the printed circuit board already, as a main board of a microcomputer.