Using a HVLP gun (high volume low pressure) only about 10 to 15 psi
The best PSI for a paint sprayer is as little pressure that is needed to create a good fan pattern and little overspray. Test on a scrap surface prior to painting,
Hire someone else to do it!!!
yes but you can destroy it I have tried it before
Tremclad makes it in regular paint or spray. The spray is better, especially if sprayed over a flat white primer they also make.
You should use plastic only spray paint for them and then let them sit over night.
I'd imagine it wouldn't do them any good. The pressure of the spray would probably kill them anyway
Get the can of spray paint and point it towards your hair then spray. You don't put spray paint in your hair!!! The poisons can kill you!!!
yes but you can destroy it I have tried it before
Yes, but if the rubber stretches, it will crack the paint.
Tremclad makes it in regular paint or spray. The spray is better, especially if sprayed over a flat white primer they also make.
Depends on the paint spray paint I'm guessing no but I might be wrong regular paint though yes definitely
tHE PRSSURE SHOULD BE BELOW 10 PSI.
Spray paint guns are usually used to paint things like cars. I wouldn't recommend using one for inside jobs. You should use regular paint, and paint it on there, or take the table outside and use spray paint. You don't need an industrial paint gun.
Yes, much faster,and if you use a good primer first, your 'coverage' is as good.
Between 30-40 lbs
You should use plastic only spray paint for them and then let them sit over night.
It depends on what spraypaint you use. You have to use a special guitar paint. But it's not safe to use regular paint.
I'd imagine it wouldn't do them any good. The pressure of the spray would probably kill them anyway
Well you can buy some at Michael's , homedepo,or sometimes at a regular store